Results 1 to 5 of 5

Thread: Restumping

  1. #1
    Join Date
    Dec 2004
    Location
    Bendigo
    Posts
    30
    Post Thanks / Like

    Question Restumping

    Just a quick question Re: stumps I am looking at concrete ones being sold left over from a job. There is 50 1.2 metre and 50 at 1metre. When I rang up about them, the guy told me that he still had them as the person who was going to buy them didn't want them as she was building a new house and these where only good for restumping. my question is

    Does this sound right the difference between new etc

    How far do I have to put the stumps into the ground

    The only reason I am considering buying them is they are the right price as in $300 the lot or $150 for each batch

    Regards

    Bear

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many
     
  3. #2
    Join Date
    Aug 2003
    Location
    Melbourne - Outer East Foothills
    Posts
    6,729
    Post Thanks / Like

    Default

    Why change the font size ?

    Some of us find it very hard to read .
    If at first you don't succeed, give something else a go. Life is far too short to waste time trying.

  4. #3
    Join Date
    Jan 2002
    Location
    Yinnar, Victoria, Australia
    Age
    56
    Posts
    1,995
    Post Thanks / Like

    Default

    Quote Originally Posted by Bear
    Just a quick question Re: stumps I am looking at concrete ones being sold left over from a job. There is 50 1.2 metre and 50 at 1metre. When I rang up about them, the guy told me that he still had them as the person who was going to buy them didn't want them as she was building a new house and these where only good for restumping. my question is

    Does this sound right the difference between new etc

    How far do I have to put the stumps into the ground

    The only reason I am considering buying them is they are the right price as in $300 the lot or $150 for each batch

    Regards

    Bear
    NOW I can read it

    Bear, I am not sure about the prices, why not call up the local concrete product supplier and ask what they charge per stump

    AS for the difference between stump types.. I would assume ( and I leave myself open here) that stumps for NEW constructions would be the type with the rod moulded into the centre

    The stumps for re-stumping would be the type with the wire loop in them to allow the stump to be nailed to the floor bearers(?)

    When I had my place restumped 18 months ago the new stumps were buried to a depth of 500mm, with a hole 500mm square and back filled with concrete.

    This subject has been debated here before, do your self a favour and search it out.
    I try and do new things twice.. the first time to see if I can do it.. the second time to see if I like it
    Kev

  5. #4
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    12,765
    Post Thanks / Like

    Default

    the soil conditions govern the depth of stumps in the ground.
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #5
    Join Date
    May 2004
    Location
    Melbourne, Australia
    Posts
    531
    Post Thanks / Like

    Default

    With regard to concrete stumps, I'm aware of three types:

    • Re-blocking type with a short wire loop at the side
    • a "new work" type with a long single wire protruding from the top
    • "bolt down" type with a threaded rod protruding from the top


    The re-blocking type are designed to be easier to attach to an existing building by placing a nail or two through the loop and bending over.

    As to depth, Echnidna is quite right - it depends. One re-blocker I knew suggested to me that you only dig down as far as the existing sole plate and remove the sole plate and don't dig any deeper. The theory is that the soil below the sole plate will have been well compacted by the house sitting on it over the years. Therefore the length of the stump required will vary with the individual stump locations. You also have to allow for the concrete "pad" when determing the length.

    If you check with the relevent Standards, you may find that you may have to go deeper to satisfy prevailing requirements.

    The usual procedure is to measure all the individual stump holes and buy stumps to the required lengths (again, allow for the pad). Stumps are sold as $ per 100mm of length.

    Chris

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •