- Wanted (Vic) Jointer #6 #7 #8
- Wanted (QLD) Stanley 444 Dovetail Plane Body
- DONE: Lie-Nielsen 212 Small Scraper Plane
- Wanted (Vic) Wtb a dual dust extractor
- Wanted (Vic) Table Saw / hybrid saw
- Wanted (QLD) WOOD fENEER
- Wanted (Vic) End grain butchers block
- Wanted (NSW) Offcuts/Leftovers/Scraps of zebra timber request for Toymaking please.
- Wanted (NSW) Pillar Drill - Meddings/Elliott/Fobco or similar
- Wanted (NSW) Falcon curved bottom spokeshave.
- Wanted to buy Behrens Homeshop Combination wood working machine
- Wanted (QLD) Lie Nielsen #98/#99 or Stanley #98/#99 with depth stops
- Wanted (QLD) Low Angle Jack Plane/ Stanley #151 flat sole spokeshave frame
- Wanted (QLD) Carter plane parts
- DONE: Festool ETS- 125 REQ sander
- DONE: Falcon F220 block plane
- Wanted (Vic) Stanley 220 parts
- Wanted (NSW) Cox Ride-On Mower Seat
- Wanted (QLD) Motor or armature for 2000 Watt GMC Thicknesser (13 inch/330mm)
- Wanted (NSW) SCM SI-15F Sliding Table Saw
- Wanted (NSW) SCM SI-15F Sliding Table Saw
- Wanted (ACT) #44 Record plough plane depth stop
- Wanted (NSW) 3m Live Edge Dining Table Slab
- Wanted (SA) 14 inch bandsaw. Adelaide
- Wanted (Vic) Hopefully a 12" Table Saw
- DONE: Depth stop for Stanley #78 Rebate Plane.
- Wanted (NT) or WA: Lathe 500mm+ Swing
- Wanted (Vic) Thicknesser blades to suit Dewalt 1151
- Wanted (NSW) Wanted to Contact robyn2839 - Bob
- Wanted (Vic) McCulloch chainsaw
- Wanted (QLD) Wasp sander
- Wanted (ACT) Jacaranda
- Wanted (TAS) Tapered wood reamer
- Wanted (QLD) Bowl gouge (12 mm)
- Wanted (SA) Cheap bench top bandsaw
- Wanted (QLD) Sherwood/Grizzly/ Busy Bee/ Craftex 6" surface grinder
- Wanted (NSW) Wanted to Buy - Tormek Sharpener
- Wanted (QLD) Looking for 1" pocket hole screws
- DONE: 6x9 Belt and disk sander
- Wanted (SA) Router bit holders (Lee Valley style)
- Wanted (QLD) Yellowood timber - small quantity
- Wanted (Vic) Lie Nielsen 101
- Wanted (NSW) Lie Nielsen 5 1/4
- Wanted (Vic) Fence & depth gauge for Record #78 rebate plane
- Wanted (QLD) Lie Nielsen 140 skew block plane
- Wanted (Vic) Triton MK3 locking pins
- Wanted (NSW) Good block plane
- Wanted (NSW) My daughter has asked for a Dropsaw for Christmas
- Wanted (Vic) Several Drawknifes
- DONE: Burl small to medium food platter serving
- Wanted (NSW) Stanley No78 depth stop and fence
- Wanted (Vic) Router table fence
- Wanted (NSW) Saw vise
- Wanted (TAS) (Hobart) Dust collector
- Wanted (NSW) ELU TGS172 Table Drop Flip Saw and ELU DAH176 Jointer/Thicknesser
- DONE: 2hp Dust collector
- Wanted (NSW) 3/4 inch Fine Firmer Chisel - With or without handle
- Wanted (Vic) Stanley 4 1/2 plane lever cap
- Wanted (NSW) Wife wants a new sliding mitre saw.
- DONE: Micrometer planer setting jigs
- Wanted (QLD) Bedrock 603 Wanted
- DONE: Brass knife threaded inserts.
- Wanted (Vic) Snooker cue stand
- Wanted (QLD) RECORD 077A BULLNOSE BLOCK PLANE. [ hunting for a blade for same]
- Wanted (QLD) AC Sheeting Offcuts
- Wanted (SA) Someone To Ship Me Edge Strip From Trademaster In Sydney
- Wanted (Vic) Turning gear
- Wanted (QLD) Combination machine
- Wanted (QLD) Wanted: American oak
- Wanted (QLD) Luna W 59 Woodworking combination user manual
- Wanted (NSW) HNT planes
- Wanted (QLD) Router Table in Brisbane area
- Wanted (NSW) Table Saw And Jointer - (Newcastle-Sydney)
- Wanted (QLD) Wanted: Festool BS75 (in Brisbane only)
- Wanted (QLD) Scroll Saw
- Wanted (Vic) Wanted: Veritas Bevel up smoother
- Wanted (SA) Gorilla Gripper - CarryMate - The Crazy Horse Dolly - or any other MDF panel carrier
- Wanted (QLD) Trton router tra001 soft start speed controller
- Wanted (NSW) Table saw
- Wanted (NSW) Berg red handle chisels
- DONE: No. 7 Jointer
- Wanted (Vic) Motor cap for Festool RS2E sander
- Wanted (NSW) WTB: DeWalt DW1151 or DW1150 or DW50
- Wanted (NSW) Triton Powered Respirator Face Shield
- Wanted (QLD) Good quality table saw
- Wanted (QLD) Spindle sander inc 1/4" spindle
- Wanted (Vic) Vic - rose or flooded gum
- Wanted (NSW) Bowl blanks wet or dry
- Wanted (QLD) WANTED Table Saw or small reach panel saw single or three phase
- Wanted (QLD) WTB Veritas or Lie-Nielsen no 6 fore plane
- Wanted (TAS) Drive belts for Zangheri & Boschetti Combination
- Wanted (QLD) Case for Festool 1400 tracks
- Wanted (QLD) Multi-Router machine
- DONE: Jennings pattern auger bits
- Wanted (Vic) Nova G3 50mm jaws
- Wanted (Vic) WTB Stanley No. 4 and jointer plane
- Wanted (Vic) Low angle jack plane
- Wanted (Vic) Mini Wood Lathe
- Wanted (Vic) Scrapers
- DONE: Stanley 4 1/2 blade
- DONE: WANT TO BUY COLEN CLENTON 4" 45 Degree Markers
- Wanted (NSW) Stick of Jarrah
- Wanted (NSW) Hickory
- Wanted (Vic) Australian Pen Blanks Wanted
- DONE: Workshop press
- Wanted (SA) Decent Single Phase Bench Grinder
- Wanted (NSW) Stanley Knuckle Joint Plane Parts
- Wanted (Vic) WTB Lie Nielsen Socket Chisels + Bronze Beading Tool
- Wanted (QLD) Wanted Southeast Queensland: basic thicknesser planer machine
- Wanted (SA) Woodfast and Durden machines
- Wanted (NSW) Big timber shed
- DONE: Leigh RTJ400 Router Table Dovetail Jig
- Wanted (Vic) Figured Offcut
- Wanted (NSW) 20 ft Shipping Container
- Cedar offcuts wanted
- Wanted (NSW) Stanley no.4 adjustment nut
- Wanted (NSW) Saw setting tool
- DONE: Caravan
- Wanted (Vic) Chasing "Fly Press With John Crouchet" book
- Wanted (NSW) Woodwork text book "woodwork in theory and practice"
- Wanted (Vic) Draw knife wanted
- Wanted (Vic) Coolabah Burl Wanted
- Wanted (Vic) Vermec ER32 collet chuck
- Wanted (NSW) Lee Valley Cast Iron chest handle pair
- Wanted (QLD) Richardson 39 pedestal drill 5 step drive pulley
- Wanted (Vic) Lie Nielsen Joinery Face Float. Push or pull
- Wanted (SA) Gifkins Dovetail Jig
- Wanted (QLD) Old screwdriver blade
- Wanted (SA) Adelaide/McLaren Vale - Jointer, Thickness Planner and Table Saw
- Wanted (SA) Wooden mallets
- Wanted (NSW) Table saw or band saw fence and mitre gauge
- Wanted (NSW) micro adjuster
- DONE: 2HP dust extractor
- Wanted (Vic) User crosscut handsaw
- Wanted (QLD) Lie Nielsen 10 1/4 Bench Rabbet Plane
- Wanted (QLD) Drum Sander
- Wanted (QLD) 1 HP Dust Collector Parts
- Wanted (Vic) Want to buy lie nielsen #4 bronze
- DONE: WTB - Lie Nielsen #4 1/2 and #5
- Wanted (QLD) Adapter for DC 6" to twin 4"
- Wanted (NSW) Want to buy Stanley 42X saw set
- Wanted (QLD) Purple Heart or Osage Orange
- Wanted (Vic) Dill bits
- DONE: Titan Red Plastic Handled Chisels 1/4", 1" and 1-1/4"
- Wanted (Vic) Cutting iron for Stanley #50 plough plane
- Wanted (Vic) Stanley 4 1/2 or 5 1/2 lever cap
- Wanted (Vic) Leigh D4R pro Dovetail jig
- Wanted (SA) Wanted 3/8 lefthand acme threaded shaft
- Wanted (TAS) Parf guide / domiplate
- Wanted (WA) YAS Routermaster