bowl-basher
2nd September 2009, 06:45 PM
Hi All
This was a special request from my late Brothers Wife. My brother requested that his Ashes were to be scattered at sea, while this was done his wife wanted to keep a small portion and asked me to make a special small urn that did not look like an urn. this is what I came up with the timber is Camphor Laurel and it stands 400mm high by 60mm dia the insert is turned from a solid 60mm brass bar
the finish is sanded to 600 sealed with N/C sealer,EEE and 3 coats of shelawax A sad thing to do and a few tears help with the polish but I was honered to be asked
Bowl-Basher
This was a special request from my late Brothers Wife. My brother requested that his Ashes were to be scattered at sea, while this was done his wife wanted to keep a small portion and asked me to make a special small urn that did not look like an urn. this is what I came up with the timber is Camphor Laurel and it stands 400mm high by 60mm dia the insert is turned from a solid 60mm brass bar
the finish is sanded to 600 sealed with N/C sealer,EEE and 3 coats of shelawax A sad thing to do and a few tears help with the polish but I was honered to be asked
Bowl-Basher