PDA

View Full Version : Carbide insert turning tools - another supplier



Sawdust Maker
10th January 2010, 09:44 PM
Found this (http://www.thingswestern.com/3.html)site on another forum
thought you lot might be interested in another source of carbide insert tools

Frank&Earnest
10th January 2010, 09:55 PM
Thanks, Nick. Hope you buy some so we can swap. :D

Sawdust Maker
10th January 2010, 09:58 PM
I'd be more interested in getting some of your carbide cutters when they get here and making my own :U
These are the whole tool looks like in comp with the Ci

NeilS
10th January 2010, 11:22 PM
Interesting range of CI tools on offer.

The 3/4" round insert Boss Hogger looks like it would do the business, but no reason why a similar beast could not be put together here without the transport cost of whole tool

.....

carbidetools
5th March 2010, 01:55 AM
If you are looking for a source on carbide inserts and carbide wood turning tools you might check out the carbidewoodturningtools.com site. We have several sizes available and round and square inserts. :2tsup:

hughie
5th March 2010, 08:19 AM
Nick,
Hmm 86 Rockwell sure is hard, would have to be careful not to drop one as it would chip real bad.
It looks more like a scraper with the negative/neutral rake on top, with this level of hardness a positive rake with out careful design might break away. But still I like the sound of it all. :2tsup:

Ed Reiss
5th March 2010, 12:51 PM
check out the prices here-

McMaster-Carr (http://www.mcmaster.com/#carbide-inserts/=62tlln)

TTIT
5th March 2010, 01:36 PM
Found this (http://www.thingswestern.com/3.html)site on another forum
thought you lot might be interested in another source of carbide insert toolsYet another mob who won't sell the cutters separately :no: Safety my a$$ :~

hughie
5th March 2010, 08:03 PM
Yet another mob who won't sell the cutters separately :no: Safety my a$$ :~[


you old cynic.... :U but I agree with you. :2tsup: