View Full Version : Golden mean calipers
hughie
26th March 2010, 07:54 PM
heres a few ideas on what out there. They are not hard to make and can be very handy as a guide to working out proportions.
I've made a couple its only a few hours to have one up and running
joe greiner
26th March 2010, 09:52 PM
AKA "Fibonacci Gauge." For alternate dimensions, there's a screenshot of a spreadsheet here: http://www.woodworkforums.com/f8/use-golden-number-wood-turning-45048/index2.html (post #20).
Forum or Google search for [fibonacci gauge] provides more info and/or insight.
AL screw posts, from stationery shops, are convenient for assembly. If using POP rivets, I suggest using washers at both sides of the wood, to reduce wear; not needed for the screw posts.
Cheers,
Joe
derekcohen
26th March 2010, 10:21 PM
I made a couple based on this article. All given as gifts...
Tassie Blackwood ...
http://i13.photobucket.com/albums/a262/Derek50/Marking%20and%20Measuring/FibonacciGauge2.jpg
with handmade rivets ..
http://i13.photobucket.com/albums/a262/Derek50/Marking%20and%20Measuring/FibonacciGaugerivets1.jpg
Regards from Perth
Derek
RETIRED
26th March 2010, 11:04 PM
I made a couple based on this article. All given as gifts...
Tassie Blackwood ...
http://i13.photobucket.com/albums/a262/Derek50/Marking%20and%20Measuring/FibonacciGauge2.jpg
with handmade rivets ..
http://i13.photobucket.com/albums/a262/Derek50/Marking%20and%20Measuring/FibonacciGaugerivets1.jpg
Regards from Perth
DerekOr tassie oak?