Help finding a lathe thread size.

[benupton]

Hi there,
I'm wondering if someone has a lathe model Dynalink 1 90 93 01000 and if they know the thread size.

[DJ’s Timber]

If it's 3/4" 10 TPI as indicated in your Cheap Lathe Chuck thread, the outside diameter of the thread will be 3/4" and there should be 10 threads per inch, put a rule on the thread and you should be able to count ten threads in the space of the 1 inch marking on the rule

[benupton]

That came from this manual (attached) It looks the same and measurements seem the same but the lathe is not at my house so i can really measure it.

[cultana]

As DJ said and from manual:
Head Stock Thread 3/4"-10 T.P.I.

or possibly a 1" - 10 TPI though this may to too large for that lathe.