Teknatool Scroll Chucks

[benupton]

Hi there,
Does the teknatool scroll chuck have an inside thread of M30 x 3.5mm.
Regards Ben

[Avery]

When you buy the chuck you nominate the insert to suit your lathe.

m30, 3.5 is one of the options.

[China]

Y0ou can replace the insert if you have the wrong thread

[benupton]

Sorry for the misunderstanding, what I meant was what is the outside thread of the insert, I need to know if the inserts will fit a different chuck.

[Big Shed]

Ben, you would not only need the diameter of the thread, but also the pitch to find that out.

You would be better off asking whether the Teknatool insert would fit your xyz chuck, ie be specific about which chuck you want it to fit.

[benupton]

Well i have not got it yet but I'm trying to find out if i can get a insert for it its a Bonham tommy bar chuck http://www.woodworkforums.com/f221/cheap-lathe-chuck-121750/ you can read about it hear.

[Big Shed]

Ben, I did a search and found this (http://www.woodworkforums.com/f8/bonham-chuck-thread-size-67873/)

[benupton]

So by what that says I could use technatool inserts. Thats good thanks every one.