seanz
27th October 2010, 07:57 AM
This might belong in the 'Sharpening' section so I won't be shocked if it gets moved but I'd like some turners opinions on sharpening.
What do you use to sharpen your tools for turning?
I currently have a little old 6'' grinder with a white wheel on one side and a grey wheel on the other with a Carbatec tool-rest on it. It's fine for plane blades and chisels.
I was thinking of leaving the little grinder set up for plane blades and getting a larger unit (8") with a buffing wheel.
I've had a bit of a google about and there are some interesting set-ups out there. The grinder and linisher system was pretty cool.......
What do you use to sharpen your tools for turning?
I currently have a little old 6'' grinder with a white wheel on one side and a grey wheel on the other with a Carbatec tool-rest on it. It's fine for plane blades and chisels.
I was thinking of leaving the little grinder set up for plane blades and getting a larger unit (8") with a buffing wheel.
I've had a bit of a google about and there are some interesting set-ups out there. The grinder and linisher system was pretty cool.......