View Full Version : marples chisels
nine fingers
20th April 2011, 06:28 PM
What price would Marples chisels be worth, a widow has about 15 of various styles to be cleared out of the shed . I picked up some silky oak boards today, but not interested in the lathe tools or the old lathe.
regards John.
Scribbly Gum
20th April 2011, 07:07 PM
What price would Marples chisels be worth, a widow has about 15 of various styles to be cleared out of the shed . I picked up some silky oak boards today, but not interested in the lathe tools or the old lathe.
regards John.
Here is a set in as new condition that sold recently:
VINTAGE MARPLES WOOD TURNING CHISEL SET M 1002 UNUSED | eBay (http://cgi.ebay.com.au/VINTAGE-MARPLES-WOOD-TURNING-CHISEL-SET-M-1002-UNUSED-/150582586949?pt=AU_Woodcrafts&hash=item230f6bee45)
This would be a good guide.
Cheers
SG
olbassy
20th April 2011, 08:51 PM
The Widow might want to get onto the gang at "Restorers Barn" Castlemaine.......they have the largest selection of used woodworking tools...(and most other things).......always call in when I go over to visit my elderly Mum.
Regards,
Worlds Slowest Wooden House and Boat Builder!
Pac man
20th April 2011, 11:47 PM
What price would Marples chisels be worth, a widow has about 15 of various styles to be cleared out of the shed . I picked up some silky oak boards today, but not interested in the lathe tools or the old lathe.
regards John.
PM me with a price plus postage to Sydney 2768 for the lathe tools
Randir
21st April 2011, 11:29 AM
PM'd.
2 threads with turning tools which you beat me to, pac man!
RETIRED
21st April 2011, 01:14 PM
Be aware that these are probably Carbon Steel not HSS.
Good chisels all the same.
Pac man
21st April 2011, 06:55 PM
PM'd.
2 threads with turning tools which you beat me to, pac man!
Hi Randir - I am sure there will be enough to go round
- ( newbie woodturner alert) how can i tell re carbon steel from a picture or the age of the tool?
RETIRED
21st April 2011, 07:02 PM
Manufacturer in this case. Marples to the best of my knowledge never made HSS turning tools, but they made excellent CS ones.
jimbur
21st April 2011, 07:03 PM
Did Marples ever make hss turning chisels?
Cheers,
Jim
jimbur
21st April 2011, 07:04 PM
A minute late . Story of my life.
Cheers,
Jim
RETIRED
21st April 2011, 07:06 PM
Yep, mine too. Either too early or too late.:wink: