Marc
19th August 2012, 04:52 PM
Hi there!
I am going to build a balustrade and would like to use double flat bar for the horizontal section and square tube for the vertical balusters.
I remember a supplier long time ago that had all sort of different decorative patterns for blacksmithing, the one I am after is a flat bar that has a wide groove rolled on one face.
Say it is 40mm wide x 3mm thick, it would have a 30 mm wide 1mm depression in the center of one face.
Something like this: http://www.everettsteel.com/public/product_info.php?cPath=24_144&products_id=1220
Anyone knows a supplier?
Kind Regards
Marc
I am going to build a balustrade and would like to use double flat bar for the horizontal section and square tube for the vertical balusters.
I remember a supplier long time ago that had all sort of different decorative patterns for blacksmithing, the one I am after is a flat bar that has a wide groove rolled on one face.
Say it is 40mm wide x 3mm thick, it would have a 30 mm wide 1mm depression in the center of one face.
Something like this: http://www.everettsteel.com/public/product_info.php?cPath=24_144&products_id=1220
Anyone knows a supplier?
Kind Regards
Marc