Andy Mac
23rd August 2012, 08:55 PM
Hello,
I have been working on a set I designed for an outdoor theatre production of Shakespeare, and thought I'd post a progress shot.
It is 4.5m high and 8m wide when opened (there are two wings which are hinged and run on HD castors). Made from 50 x 25 RHS and 25 x 25 RHS, MIG welded, with many bolted joins to get it out of the workshop and onto stage.
Here it is partly sheeted with 4mm bracing ply, which will be covered with polystyrene, then PVA/muslin before painting. I have 4 weeks to go before bump-in :oo:
I also have included a photo of the design model I made from balsa, 1:25 scale.
Cheers,
I have been working on a set I designed for an outdoor theatre production of Shakespeare, and thought I'd post a progress shot.
It is 4.5m high and 8m wide when opened (there are two wings which are hinged and run on HD castors). Made from 50 x 25 RHS and 25 x 25 RHS, MIG welded, with many bolted joins to get it out of the workshop and onto stage.
Here it is partly sheeted with 4mm bracing ply, which will be covered with polystyrene, then PVA/muslin before painting. I have 4 weeks to go before bump-in :oo:
I also have included a photo of the design model I made from balsa, 1:25 scale.
Cheers,