View Full Version : Egg Timer Holders
Woodchuck2
15th June 2013, 10:49 PM
Off-centre eggtimer holder plans/instructions. Does anyone know where I can get hold of same?
Sprog
17th June 2013, 12:21 PM
Off-centre eggtimer holder plans/instructions. Does anyone know where I can get hold of same?
Try Egg Timer (http://www.woodturnerswa.com/Model%20Drawings/085%20egg%20timer.pdf)
pommyphil
17th June 2013, 02:25 PM
Thanks for that, a nice design, will make a few. Phil
Wood Nut
17th June 2013, 07:02 PM
What he said:)
Woodchuck2
18th June 2013, 10:09 AM
Thanks, Sprog for jogging my memory!
I have sourced Ray Hopper's "Multi-Centre Woodturning"
from the library where I originally saw the idea some years ago.
Like Pommyphil I'll now give it a burl.
turnerted
18th June 2013, 05:27 PM
Buy the glass bit first.I notice the ones Jim sells are a different size and the plans would need to be modified.
Ted
pommyphil
18th June 2013, 06:17 PM
Yes The plans are for 14mmX81mm The ones I have ( from Jim ) are 29mm X 95mm
Big difference, to scale it up would not work. Back to the drawing board. Phil
chuck1
18th June 2013, 06:40 PM
Yes The plans are for 14mmX81mm The ones I have ( from Jim ) are 29mm X 95mm
Big difference, to scale it up would not work. Back to the drawing board. Phil
you should be able to scale it up!
pommyphil
18th June 2013, 07:24 PM
Yes, but it might look a bit chunky, at least 15mm thicker alters the proportions heaps.
I'll play around with it, luckily not commercial so time is free. Gentlemen turners. :D