Assistance Reqd

[SHIPPERS]

I was wondering whether any of you out there might be interested in helping me out.
I have a workbench project on the go and as part of the project i need/want to make a couple of vises using wooden bolts. I have tried to make the blanks using a router jig i made but the finish isnt up to scratch. For the purposes of discussion the blanks are to be in the area of 50 -60mm diameter by 600 long. Tallowwood to be laminated to create the blank.
I am located in Melbournes north west.
If anyone is interested send me a reply
Regards
SHippers:roll:

[ian thorn]

If you Google Carba Tech they have a jig for making that type off thread

[BobL]

If you Google Carba Tech they have a jig for making that type off thread

The Thread boxes at Carbatech are a max of 38 mm

[tea lady]

I turned some vice bolts for Woodwould ages ago. Wonder if they are on his blog.? :hmm: :pi: Can't find it in a hurry. Made that one in Merbu. Think he cut the thread with a router like you are doing. :shrug:

[tea lady]

Found the thread about it. No info about the threads there though. :hmm:

293108

http://www.woodworkforums.com/f11/things-they-changing-79995/index6.html

[SHIPPERS]

I can cut the threads just not the blanks.
I have a jig found on this forum for cutting the threads.
As said earlier i cut make the blanks with a router jig just not as accurate as i would like:D

[SHIPPERS]

There you go TL. Nice job

Shippers:2tsup:

[tea lady]

I could turn them for you but I am the other end of Melbourne. I think there are closer turners that would be able to do it.

[SHIPPERS]

Thanks for the offer TL. I will sit awhile to see if any other offers come up. If none appear i may drop you a PM

Regards
Shippers:2tsup: