mat_au
10th April 2014, 11:42 PM
just wondering if anyone can help me do some re wiring to my lathe. i have a variable speed lathe that i want to add another off/on and speed switch to a magnetic holder so i dont have to lean over my work to adjust speed or turn it off
i have this lathe http://www.popsshed.com.au/Product_Main.aspx?cid=8&scid=54&pid=543
any help or advice would be great
ADDED BY ADMIN
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.
WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk
i have this lathe http://www.popsshed.com.au/Product_Main.aspx?cid=8&scid=54&pid=543
any help or advice would be great
ADDED BY ADMIN
DISCLAIMER
No liability is accepted by UBeaut or the Wood Working Forum's administrators
or moderators for advice offered by members posting replies
or asking questions regarding electrical work.
We strongly advise contacting a Licensed Tradeperson for all electrical work.
WARNING
Information supplied within posts is not to be considered as detailed formal instructions to complete a task.
Members following such information do so at their own risk