PDA

View Full Version : Tormek BGM 100



John Saxton
10th September 2015, 07:43 PM
I was wondering whether anyone uses the Tormek bench grinding set (BGM-100) to shape their woodturning tools ,what their take on it would be?

I have a link here showing the set up.

https://www.youtube.com/watch?v=j46grxNMsmo

Cheers:)

Acco
10th September 2015, 07:52 PM
Great for reshaping, establishing new bevels or repairing chipped tools prior to finishing it off on the Tormek.

A good quality wheel or CBN is also a must as well on the dry grinder

Big Shed
10th September 2015, 08:09 PM
Yep great addition to the sharpening/grinding area, use mine often with the Tormek jigs.

I made my own

http://www.woodworkforums.com/showthread.php?t=121906&highlight=tormek

John Saxton
10th September 2015, 08:14 PM
Thanks Acco, Currently running 120grit white 8" grinding wheels, not sure how they compare to CBN wheels .
I like the idea of the Tormek set-up as a means to keep one bevel on the tool !

Cheers:)

John Saxton
10th September 2015, 08:20 PM
Yep great addition to the sharpening/grinding area, use mine often with the Tormek jigs.

I made my own

http://www.woodworkforums.com/showthread.php?t=121906&highlight=tormek

Thanks Fred, appreciate that you have made one you made a good job of it from what I can see.I have got the Tormek & the jigs ,thought that this would speed things up a little when needing to go back to the grinder!

Cheers:)

Jim Carroll
10th September 2015, 09:01 PM
John they are great for reshaping a damaged edge.

One thing to keep in mind is that the there will be more of a hollow grind as you are going from a 8" wheel to a 10" wheel.

It is not much on some tools but easy to work with.

Mobyturns
10th September 2015, 09:18 PM
I was wondering whether anyone uses the Tormek bench grinding set (BGM-100) to shape their woodturning tools ,what their take on it would be?

I have a link here showing the set up.

https://www.youtube.com/watch?v=j46grxNMsmo

Cheers:)

Gives you the best of both worlds.

nalmo
10th September 2015, 09:46 PM
I love mine. Wasn't prepared to spend the big $$ yet on a Tormek sharpener, but this gives me consistent sharpening as good as I can get on a white wheel. A light touch is all it takes to get a sharp edge.

John Saxton
12th September 2015, 07:21 PM
John they are great for reshaping a damaged edge.

One thing to keep in mind is that the there will be more of a hollow grind as you are going from a 8" wheel to a 10" wheel.

It is not much on some tools but easy to work with.

Jim, the dedicated grinder is an 8" one I have white stones on both sides but am only contemplating having one jig set up.

Cheers:)