Gluing Film Plywood

[thumbsucker]

I have scored some pieces of film ply I would like to glue a few pieces together. However I have read that film plywood does not glue well.

I am thinking would it be possible to glue two piece of film ply together, If I where to cut a series of groves on the face giving a spaces were wood meet wood and for the glue like epoxy to take hold?

[Justin]

I'd try AV 56. Comes in 500ml bottles as well as multi-litre drums. Bostik Australia :Industry - Catalogue - AV56 Laminated Board Adhesive (http://www.bostik.com.au/industry-products-catalogue-sheet-28513-av56_laminated_board_adhesive-m-0-g-410.html)

Available from various cabinetmaking suppliers, I got some from Plyboard Distributors in Dandenong.

You could also try good ol' liquid nails, or contact adhesive.

[Jonzjob]

Bit late onto this, but there's some gen here on it

FILM FACED PLYWOOD | Europlywood (http://europlywood.com/catalogue/film-faced-plywood/)

[Prle77]

I've had very good results with Selleys polyurethane glue (Aquadhere).. I've scuffed the ply so the glue can key in... provided pretty good joint...