Vicmarc VL200 problem

[man from uncle]

I have a vicmarc VL200 with Fuji FVR E7 invertor.
the problem is that the lathe spins in reverse fine and I can adjust the speed in reverse, but will not spin forward at all. Dead as dodo.
I have checked the little contact switch and that is fine. I have changed the cable from the push switch to the connection block, that is fine.
any ideas? I am wondering if the invertor needs resetting, but I cannot find out how to do it

any help appreciated

[Jim Carroll]

Contact Vicmarc direct as marco can help you with this, easier that others trying to diagnose what may be wrong and stuffing things up more

[Phily]

I agree with Jim, I've found the guys really good to deal with and the prices very reasonable. I dropped a chunk of timber on the variable speed knob of my VL300 - I think it cost about $30 to replace.

[bueller]

Contact Vicmarc direct as marco can help you with this, easier that others trying to diagnose what may be wrong and stuffing things up more
Agreed, Marco is great to deal with.

[man from uncle]

Agreed, Marco is great to deal with.

thanks all
i have been in touch with Marco and he is going to send me some diagnostics
but was just wondering if anyone has thoughts about what it could be