Big A
11th December 2016, 12:45 PM
I do not know what this tool is called. I suspect that it is used for rolling an edge on sheet metal or copper, but what would I know?
The leading hand out at the local Heritage Village asked if I could pretty it up a bit so that it could be put on a display board in the powerhouse, so I removed those very elegant handles and replaced them with a bit of local Ironbark. I thought that this item really should have ferrules, so a 25mm joiner provided that. Slapped a bit of Penetrol Woodoil on and there it is.
(Hope you can work out before and after!)
Alister.
The leading hand out at the local Heritage Village asked if I could pretty it up a bit so that it could be put on a display board in the powerhouse, so I removed those very elegant handles and replaced them with a bit of local Ironbark. I thought that this item really should have ferrules, so a 25mm joiner provided that. Slapped a bit of Penetrol Woodoil on and there it is.
(Hope you can work out before and after!)
Alister.