CWTC3703C - Electric Motor (240V) 1HP

[thumbsucker]

I purchased this CMG CWTC3703C - Electric Motor (240V) 1HP 1440rpm three years ago with the intent of using it with a 14" Woodfast Bandsaw. However while I did set it up for a few test cuts in the bandsaw I never got around to restoring the bandsaw. Now that I am parting with the bandsaw here (http://www.woodworkforums.com/f275/woodfast-14-bandsaw-enclosed-stand-213162#post2015815). I also need to find a new home for the motor. The motor is for all intents and purposes is brand new it has less then 20 minutes of run time on it.

I do not have any idea what I paid for this thing. So I will make it an auction. Let the market decide.

Inspections are welcome and pick up is from Coburg Melbourne.


CWTC3703C - Electric Motor (240V)
1HP
1410rpm


ORDER CODE
E050

Model
CWTC3703C

Motor Power
1HP

Speed
1410rpm

Shaft Diameter
Ø5/8"

Voltage
240V

Amps Required
10A

Reversible Motor
http://images.machineryhouse.com.au/layout/icon-tick.gif

Type
Fan Cooled

Power Connection






409480 409477 409478 409479 409481 409482

[Necromancer]

Please give us an indication of how amount you want to prevent inadvertent low balls?

[thumbsucker]

I have started the minimum bid at $100.

Machine Warehouse is asking $450 for a 1HP made in Taiwan.

So anything between $100 and $350 would be a good starting point.