Vicmarc VM90 Chuck

[Mobyturns]

Estate clear out – selling on behalf of family. Not anAuction.
Genuine Vicmarc VM90 tommy bar chuck fitted with M30 insertand standard jaws only. 1 x 3mm T-Bar Allen Key, (NO Woodscrew), 2 x 7.9mmTommy Bars. Chuck is in good working order, and has been buffed on aScotch-Brite wheel to remove dust and light surface rust. Condition per photos.
$110 ONO

411815411814411813

The VM90 chuck with Long Nose jaws - is not included in this sale, pictured to show typical condition before light clean up.

Happy to post at purchasers cost – Weight approx. 2kg sowill require a 3kg Parcel Post ($13.80) or Express Post ($15.65) satchel.
Owner’s manual can be downloaded from https://vicmarc.com/index.php?option=com_content&view=article&id=42&Itemid=490 (https://vicmarc.com/index.php?option=com_content&view=article&id=42&Itemid=490)
https://vicmarc.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=96&virtuemart_category_id=14 (https://vicmarc.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=96&virtuemart_category_id=14)

[bueller]

I'll take this one

[Mobyturns]

I'll take this one


Thank you, its yours.

[Mobyturns]

SOLD

Thank you Bueller, your support is much appreciated.

[issatree]

Hi Mobyturns,
I had thoughts I was the only one who had those Jaws.
I've been to a lot of Wood Turning Weekends, & that is the 1st. time I have seen any one with them, They are invaluable, & I use them all the time on the Smaller Wood.
I have had them many years now, & even then they cost me $92.

[Mobyturns]

The Long Nose Jaws are a little different to the current offering from Vicmarc. https://vicmarc.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=118&virtuemart_category_id=17