A new concept in laminating?

[powderpost]

Twelve months ago I started to play with a new idea. the first on I made out of pine because it was experimental and didn't know if it would work. The lessons learned from that one made me more confident so I use red cedar. I wanted to experiment with a three layer veneer joint, and some unpredicted effects appeared. Just about got a handle on this idea now, so mark four is developing. This last one is Queensland maple and stands 200mm high and130mm diameter. Finished with sprayed lacquer.
Where to now???

Jim

Mark1 Pine
444412

Mark2 Cedar
444411

Mark3 Maple
444413

[artful bodger]

Twelve months ago I started to play with a new idea. the first on I made out of pine because it was experimental and didn't know if it would work. The lessons learned from that one made me more confident so I use red cedar. I wanted to experiment with a three layer veneer joint, and some unpredicted effects appeared. Just about got a handle on this idea now, so mark four is developing. This last one is Queensland maple and stands 200mm high and130mm diameter. Finished with sprayed lacquer.
Where to now???

Jim

Mark1 Pine
444412

Mark2 Cedar
444411

Mark3 Maple
444413
Perhaps you could tell us all how you go about making such a piece?:U

[Paul39]

Powderpost,

WOW!! All spectacular.

[hughie]

Jim write the book. :)

[Doc Ron]

Very pretty, and excellent craftsmanship.