artful bodger
20th December 2018, 06:54 PM
Thinking seriously about lashing out on a bowl saver.
Mainly for larger bowls at first.
The McNaughton one looks OK however I can see straight away that the mounting post is going to be an issue.
Although my toolrest banjo has a 1 inch post size the lathe I have is a one off with a big swing (860mm)
447029
From the next picture you can see it is approx 210mm from banjo to lathe axis, plus I will need about 110mm (320 all up) going into the banjo.
447030
Of course the tool posts on the McNaughton system are not that long which means I'd have to get a length welded on to the standard McNaughton post (Would not trust my own welding skills) assuming that could be done. Or perhaps order one straight from the maker with a custom length post. I see on their website they have a longer post for a Powermatic lathe but it is still not enough.
So there is going to be a bit of faffing around.
Anyway, interested in opinions about the McNaughton set up or thoughts about better set ups. Have heard(searching this forum) they struggle with dry hardwood and using on green timber is best.
Taking into account current exchange rates am also miffed that these savers are way cheaper to buy in the U.S.
Possibly interested in a second hand set too from a forum member, perchance.
Cheers
Mainly for larger bowls at first.
The McNaughton one looks OK however I can see straight away that the mounting post is going to be an issue.
Although my toolrest banjo has a 1 inch post size the lathe I have is a one off with a big swing (860mm)
447029
From the next picture you can see it is approx 210mm from banjo to lathe axis, plus I will need about 110mm (320 all up) going into the banjo.
447030
Of course the tool posts on the McNaughton system are not that long which means I'd have to get a length welded on to the standard McNaughton post (Would not trust my own welding skills) assuming that could be done. Or perhaps order one straight from the maker with a custom length post. I see on their website they have a longer post for a Powermatic lathe but it is still not enough.
So there is going to be a bit of faffing around.
Anyway, interested in opinions about the McNaughton set up or thoughts about better set ups. Have heard(searching this forum) they struggle with dry hardwood and using on green timber is best.
Taking into account current exchange rates am also miffed that these savers are way cheaper to buy in the U.S.
Possibly interested in a second hand set too from a forum member, perchance.
Cheers