PDA

View Full Version : 60100 Regular Balcotan 100 - glue



greenie512
17th December 2005, 11:52 AM
A few weeks ago I floated a question about polyuthene glues because I was looking for a long-as-possible assembly time and in the end I used Titebond poly which worked fine.<o></o>

I’ve just seen a mention of Balcotan Regular in a <st1:country-region w:st="on"><st1></st1>UK</st1:country-region> mag that gives 75 mins open joint time see - http://www.holdich.demon.co.uk/chemical/balcotan.html has anyone used this stuff?
<o></o>
I’ve done a quick search on the net and can not find an Aussie Supplier!<o></o>

Cheers - Phil

Termite
17th December 2005, 12:29 PM
75 min :eek: that equals the open + clamp time for Titebond Poly. Would be great if you needed the extra hour of open time.

AlexS
17th December 2005, 03:56 PM
75 min :eek: that equals the open + clamp time for Titebond Poly. Would be great if you needed the extra hour of open time.
Could be useful - sometimes you need it open as long as possible, sometimes as little time as possible.