Tom O Donnell
30th May 2000, 11:10 PM
Yes it can be done
Though I had to make a 'Plug' using the same jig to complete the project
The box was 150mm x 80mm x 32mm Base with a lid the same size only 16mm thick though I reduced the weight of the inside I had also to make a second plug to complete the lid.
Only one jig was used with the two plugs.
Tom
------------------
TomnJarrah
Though I had to make a 'Plug' using the same jig to complete the project
The box was 150mm x 80mm x 32mm Base with a lid the same size only 16mm thick though I reduced the weight of the inside I had also to make a second plug to complete the lid.
Only one jig was used with the two plugs.
Tom
------------------
TomnJarrah