jow104
28th April 2003, 05:09 AM
I attempted to rout some small pieces of timber (10x10") stopped trenches etc. but came unstuck using above setup.
The work shifted slightly on the table (I did have an under chipboard sheet covering the whole table.)
I screwed blocks arond the 3 blank sides.
Have any members tried these under fabric sheets with the overhead workcente setup? Does it work.
Any advice gratefully received.
The work shifted slightly on the table (I did have an under chipboard sheet covering the whole table.)
I screwed blocks arond the 3 blank sides.
Have any members tried these under fabric sheets with the overhead workcente setup? Does it work.
Any advice gratefully received.