arose62
27th January 2003, 09:41 PM
I did my first woodturning today!
I have a SuperCheapaNasty lathe, $26 worth of chisels from the same place, and a piece of wood that now looks nearly like a sort of carvers mallet, with a handle that's too short.
I've learned "Rub the bevel" and "Rub the bevel doesn't work if the chisel isn't sharp", but would welcome other hints/tips/suggestions & advice.
Cheers,
Andrew
I have a SuperCheapaNasty lathe, $26 worth of chisels from the same place, and a piece of wood that now looks nearly like a sort of carvers mallet, with a handle that's too short.
I've learned "Rub the bevel" and "Rub the bevel doesn't work if the chisel isn't sharp", but would welcome other hints/tips/suggestions & advice.
Cheers,
Andrew