jow104
13th May 2003, 05:01 AM
The positioning clamps which fix to the table base plate are not a permanent fixture.
The nylon lock nuts fibrate loose?.
You will spot something is going wrong when you find that the collet does not wind up cleanly through the base plate (it wiil foul the black plastic insert on table)
Easily fixed but time consuming you have to realign the router set up from scratch.
Thought I would pass on my experience on this subject.
The nylon lock nuts fibrate loose?.
You will spot something is going wrong when you find that the collet does not wind up cleanly through the base plate (it wiil foul the black plastic insert on table)
Easily fixed but time consuming you have to realign the router set up from scratch.
Thought I would pass on my experience on this subject.