PDA

View Full Version : Timber Source Perth



smidsy
20th December 2006, 03:30 PM
Hei Folks,
Bunnings is over priced and usually poor quality and Carbatec is too far to travel.
Anyone know of a source for decent quality reasonably priced timber south of the river.
Thanks
Paul

Nevyn
21st December 2006, 01:04 AM
Not real sure, been looking myself. Bought bits from Collies, but not much on the quality there either.

Just put in an Order with Carbatec, lucky they still owe me a delivery of a router table so combined it to reduce delivery cost.

A local south supplier of quality Australian timbers would be good.

nakal
21st December 2006, 03:44 PM
I have bought from here before.

http://www.watimber.com.au/

Not sure how good the prices are compared to other places, but he has a good range of timber. Call before you go there as he is not always open.

Robert WA
21st December 2006, 03:58 PM
These people may be worth a look???
http://www.westerntrade.com.au/timber/timber.htm
I was told about them some time ago but, as I live in timber Heaven, have never had occassion to go and have a look.

celeste
21st December 2006, 08:49 PM
Hi all

I came across one on the net when I was looking for something else, I will have a look see if I can find it again - it was south near stock roas I think.

Celeste

celeste
21st December 2006, 10:04 PM
Hi all

I had a quick look cannot find the one I saw but I found these

www.allwoodtimbersupplies.com (http://www.allwoodtimbersupplies.com)
www.fremantletimbertraders.com.au (http://www.fremantletimbertraders.com.au) - recycled wood

I will keep looking for the other one it was a large co. tho

Celeste

Nevyn
22nd December 2006, 09:59 AM
Fantastic info so far, thanks from me and my other half. Western Trade is real close so dropping in is no problem.

Cheers from Perth

Nigel

corbs
1st January 2007, 03:40 PM
Paul,
If Carbatec is too far north then this guy will probably be too far south but I have purchased from him when I was over west and he was good to deal with. Not sure if he is still around but Steve Stone at Griston Timber 9726 2292 is down around Dunsborough.

Good luck...

Corbs

John Saxton
2nd January 2007, 10:38 PM
Paul,
If Carbatec is too far north then this guy will probably be too far south but I have purchased from him when I was over west and he was good to deal with. Not sure if he is still around but Steve Stone at Griston Timber 9726 2292 is down around Dunsborough.

Good luck...

Corbs


Just a correction on the post by Corbs,Steve Stone & Gristone Timber are located at Golding Cr off Harris rd in Picton ,Bunbury.


Cheers:)