PDA

View Full Version : Finishes over estapol tung oil



fcm
1st June 2001, 02:32 PM
I have a redgum table slab that has been sealed with 3 coats of wattyl estapol tung oil - a durable subdued gloss floor sealant.

To finish it off I have planned to fine sand the estapol up to 1200 grit and use french polish. I've tried a small area on the bottom surface which hasn't shown any immediate problems.

Does anyone know if there would be adhesion or other problems with this application?

Roger Peine
1st June 2001, 02:53 PM
Mate. I'm not familiar with estapols Tung oil however, i have used tung oil (Cabots & Ruskins) under shellac (Normal practice) with great results...