schaf
17th September 2003, 10:27 PM
G day all,
Where are the wood carvers. There are never any postings from carvers.
A while back Nadcarves posted a piece on sharpening of chisels.
Nadcarves, I need more help.
Last week I droped my 12/6 V tool point down on the concrete. It is now a sorry sight.I have spent a couple of hours on the stone and can only see one small spot of white light but the cut is not smouth, in fact it is feels very jaged and catchy.
I started by using the tool point down to the stone to smouth the tip of the chisel and then worked both sides and over the corner equally but am still not happy.
It was a good tool. Any help or advice would be appreciated
Regards Terry.
Where are the wood carvers. There are never any postings from carvers.
A while back Nadcarves posted a piece on sharpening of chisels.
Nadcarves, I need more help.
Last week I droped my 12/6 V tool point down on the concrete. It is now a sorry sight.I have spent a couple of hours on the stone and can only see one small spot of white light but the cut is not smouth, in fact it is feels very jaged and catchy.
I started by using the tool point down to the stone to smouth the tip of the chisel and then worked both sides and over the corner equally but am still not happy.
It was a good tool. Any help or advice would be appreciated
Regards Terry.