PDA

View Full Version : Luna w59



Lisa xx
1st October 2007, 09:23 PM
HI
can anyone tell me where i can get parts for w59 master universal.
Thanks

BernieP
1st October 2007, 09:49 PM
G'Day Lisa

Could try this site even over your side of the world:2tsup: and welcome to the forum.

Cheers
Bernie

TePe
1st October 2007, 11:33 PM
Hi Lisa.

Looks as if you may have your work cut out getting spares.


Check out this thread - Luna W59 (http://www.ukworkshop.co.uk/forums/viewtopic.php?t=16071&highlight=&sid=1e9734e05649d789b00edae3cd2c7be2)it may help you.

hughie
1st October 2007, 11:41 PM
try these links.

http://www.woodworkforums.com/archive/index.php/t-4140.html
http://www.woodworkforums.com/archive/index.php/t-13443.html

Lisa xx
2nd October 2007, 08:58 PM
HI all
Thanks for the quick reply:D

UlrichL
4th October 2007, 06:30 AM
Hallo Lisa,

I have a Luna tablesaw myself and have already tried without success to contact the former Swedish manufacturer. The good message is that some of the former Lini or later Luna machines are still produced under the new brand of Ejca - have a look at http://www.ejca.se (http://www.ejca.se/). The bad one: I never got any answer to my requests for some spare parts which I needed. But the former German represenation of Luna still exists (http://www.hk-vierseiter.de/english/index.htm) and - though you will not find any such information on their website - they still sell spare parts.

Best wishes

Ulrich