Sturdee
15th November 2003, 07:35 PM
This is how I built in my SCMS into my workbench. The saw is level with the bench and the extra fence on the left side is 2 metres and on the right side a further metre.
Peter.
Sturdee
15th November 2003, 07:37 PM
The fence has 3 sliding lift up stops on each side and together with the 500mm spacer stick can be used for all measurements. The measuring tape is an ordinary dressmakers tape fixed to the fence with double sided adhesive carpet tape.
Peter.
Sturdee
15th November 2003, 07:39 PM
And this is a close up.
Peter
Caliban
16th November 2003, 08:36 PM
Wow Peter
Is that a workshop or a hospital?
I love your setup.
Well done
Cheers
Jim
GCP310
16th November 2003, 08:47 PM
You sure do love that orange paint. ;-)
Very inspiring, i am planing something similar with my dropsaw.
but a mobile version that stores my gal toolboxes on slidout shelves. The stops will be similar to your setup. I shall post pic soon
G