Dust Maker
4th June 2004, 02:27 PM
Hi there,
I thought if a jig that transfers depth of pocket to router accuratly withoutneed of measuring. Picture is attached.
All You need is a Screw (with full threads and head chopped off), couple of nuts to lock the screw and a peice of wood.
making should be self explanatory in the picture.
<U>Use</u>
Turn it upside down and turn thre screw to set the depth of pocket. Lock it it lock nut and on other side you have exact depth that U have to set on router.
This can be used for table saw as well.
Thanks
Dust maker
PS any comments are most welcome
I thought if a jig that transfers depth of pocket to router accuratly withoutneed of measuring. Picture is attached.
All You need is a Screw (with full threads and head chopped off), couple of nuts to lock the screw and a peice of wood.
making should be self explanatory in the picture.
<U>Use</u>
Turn it upside down and turn thre screw to set the depth of pocket. Lock it it lock nut and on other side you have exact depth that U have to set on router.
This can be used for table saw as well.
Thanks
Dust maker
PS any comments are most welcome