Weekend work
Posted 15th Oct 2007 at 09:55 AM by jmk89
Well I managed to get something done this weekend!The drill press table now has a fence and can also mount the drill press vice and the vertical lathe. Here are some pictures.
You may notice the brass knobs. As you can see they now have some knurling. I put that on with the Knurlmaster. It is really easy and doesn't depend on getting the hole in the centre! If you look closely, you will see that none of the knobs has its hole in the centre! I have to make a few more knobs over the next few nights and will work on getting my technique better so that the hole goes closer to the middle.
I will also get some brass washers to make it look better!
You may notice the brass knobs. As you can see they now have some knurling. I put that on with the Knurlmaster. It is really easy and doesn't depend on getting the hole in the centre! If you look closely, you will see that none of the knobs has its hole in the centre! I have to make a few more knobs over the next few nights and will work on getting my technique better so that the hole goes closer to the middle.
I will also get some brass washers to make it look better!
Total Comments 0
Comments
Total Trackbacks 0
Trackbacks
Recent Blog Entries by jmk89
- A new workbench (A slow WIP) Part 1 (4th May 2011)
- Getting inlaid (16th Mar 2011)
- A slow grind (7th Mar 2011)
- Serendipity (1st Dec 2010)
- The daily grind (15th Nov 2010)
