Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
29th September 2012, 03:53 PM #1Intermediate Member
- Join Date
- Apr 2012
- Location
- North of Auckland, NZ
- Age
- 31
- Posts
- 45
My first carving- a natural form vase/sculpture.
P1060820.jpgP1060827.jpgP1060828.jpg
Since I cannot do any turning at the moment, I decided to try my hand at carving for the first time. I had a lovely gnarly branch of Puriri (sometimes called New Zealand Ironwood) which I didn't have any plans for, so I decided to have a go at that.
So I whittled her down with my old Tremontina Sports knife (of all things!) to expose the beautiful twisting grain. I carved down the bits I didn't like, and accented a few bits that I did, but more or less just let it stay how it wanted to be. I hand sanded the outside and as much of the inside as I could reach, then oiled it up with mineral oil. The mineral oil took it from a grey-green-brown colour, to a rich, dark brown with orangey flares in; stunning. I then drilled down the natural hollow a bit further, to make it more vase-y.
To present the piece, I stripped down a few pieces of dried flax, and cut some lengths of small-gauge wire. I arranged them in the 'vase' part, held in place with just a little glob of hot glue (they would have stayed without, but I wanted them to have a particular arrangement). I then collected some little river rocks; I tried to chose some orange tinted ones and some darker ones. I put the piece in a triangular glass vase, and filled it with the rocks- the oranger ones at the bottom, building up to the dark black-blue ones. I did this to try reflect the flaring colours of the wood.
All in all I reckon it was not a bad first attempt! Criticisms, suggestions and comments are always welcome (And sorry about the photos!)
-
29th September 2012 03:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th September 2012, 06:57 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
I like it,! Shows good imagination!
Similar Threads
-
Butterfly Natural edge vase.
By kcam in forum WOODTURNING - GENERALReplies: 17Last Post: 11th July 2012, 10:54 AM -
natural edge vase
By turnerted in forum WOODTURNING - GENERALReplies: 5Last Post: 19th March 2012, 05:28 PM -
Natural edge yew vase & form
By cornucopia in forum WOODTURNING - GENERALReplies: 7Last Post: 29th March 2011, 09:15 PM -
Natural Edge Hollow Form
By joe greiner in forum WOODTURNING - GENERALReplies: 13Last Post: 4th March 2010, 10:40 PM -
Natural Edge Box Elder Burl Vase
By Old Arn in forum WOODTURNING - GENERALReplies: 8Last Post: 27th February 2007, 03:09 PM