Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21
  1. #16
    Join Date
    May 1999
    Location
    Grovedale (Geelong) Victoria
    Age
    74
    Posts
    12,208

    Default

    Sharpened both sides.... yep.

    Width of blade approx 25mm - 30mm with a skew angle of between 20 - 40 degrees off square, your choice. I prefer an angle of around 40deg.

    Used to cut the blade off on the edge of the grinding wheel, then sharpen on inverted belt sander or linisher starting grit 120 for shaping then 240 up to 800 - 1200 if you can get it. Scary sharp on steroids.

    Finish off on water stones or Water of Ayer stone and Hard Arkansas stone
    then on to felt buff loaded with jewelers rough either white or blue (for stainless steel)

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #17
    Join Date
    Apr 2005
    Location
    kyogle N.S.W
    Age
    50
    Posts
    4,844

    Default

    Ta Neil. I'll give it a go.

  4. #18
    Join Date
    May 2006
    Location
    Gosford
    Posts
    770

    Default

    Good thread, Jake. Plenty of useful data here. Had quick look at the website mentioned by Hi Ho ( http://www.chippingaway.com/ ). This looks like another site worth perusing when there's more time available (ha!).

    As a matter of interest, I have recently been buying a few second hand carving chisels in the different Addis brands - made in UK. Apparently there have been a few generations making chisels in the Addis history. The ones I have gathered so far have been mainly SJ Addis which I think is the original company.

    Anyway, so far I've been able to acquire quite a few at reasonable prices - most around $10-$15, generally including postage. There is a bewildering range of shapes, sweeps & sizes, and some of them are much more highly prized than others. Usually the bigger chisels and curved sweeps are more exxie, but this is the case regardless of whether they're new or not. I've even managed to acquire an Addis catalogue from the 50's which shows all of the shapes, sizes and prices etc.

    Still, with a little patience I'm sure I can assemble a fairly comprehensive set of 20 or so chisels for less than $300, which should hold their value very well because of the ongoing popularity of the Addis name. The only downside is the varying condition of the pieces that you receive - particularly in relation to handles. This is the reason I've been sourcing info on making and fitting handles recently. It's a fairly mottley looking collection at the moment, so I intend to fit them all with new matching handles in the same profileas the original design. All good fun - hopefully.

    Wayne
    Don't Just Do It.... Do It HardenFast!!

    Regards - Wayne

  5. #19
    Join Date
    Dec 2006
    Location
    MEL VIC AUS
    Age
    59
    Posts
    1,604

    Default

    hardenfast where do look to find your chisel,,, on e/bay

    mister ubeaut or god which ever you like best ,how about a carving for the gallery
    smile and the world will smile with you

  6. #20
    Join Date
    Apr 2007
    Location
    Upper Ferntree Gully
    Posts
    194

    Default

    I really like Pfeil tools. I use them and Three Cherries chisels. I find them easy to keep a nice polished, stropped edge on.

  7. #21
    Join Date
    Dec 2004
    Location
    Kingman, Arizona USA
    Posts
    74

    Default

    I have Stubai and Ashley Iles....and have to say although the Stubai are great tools, for some reason I really like and prefer the Ashley Iles?

Page 2 of 2 FirstFirst 12

Similar Threads

  1. what wood carving tools to buy
    By nadcarves in forum WOODCARVING AND SCULPTURE
    Replies: 0
    Last Post: 24th May 2003, 11:57 AM
  2. Sharpening carving tools
    By Eowyn in forum WOODCARVING AND SCULPTURE
    Replies: 2
    Last Post: 22nd August 2002, 08:05 PM
  3. Whats required?
    By John Saxton in forum WOODCARVING AND SCULPTURE
    Replies: 6
    Last Post: 15th August 2000, 11:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •