Needs Pictures: 0
Results 1 to 15 of 28
Thread: Abranet question
-
30th June 2022, 06:12 PM #1.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
Abranet question
Do the Abranet mesh sanding sheets stick to standard hook and look backed sanders?
If not, is it possible to purchase the appropriate backing sheet.
I also see there are a range of sheets available from 70 x 125 up to Bout 115 x 400mm?
For woodies that have hand sander versions of the Abranet what size sheet do you find works best.
Thanks very much.
-
30th June 2022 06:12 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th June 2022, 06:50 PM #2Senior Member
- Join Date
- May 2018
- Location
- South Australia
- Age
- 54
- Posts
- 272
Originally Posted by BobL;[URL="tel:2284857"
Cheers Andrew
-
30th June 2022, 07:07 PM #3
Hi Bob.
I have switched to Abranet, but only have 150 sized sanders. The dust collection is better than Festool's already very good paper. The discs seem to last longer than Granat paper, which means I have enough for 1.2 lifetimes.It's all part of the service here at The House of Pain™
-
30th June 2022, 07:41 PM #4GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,645
-
30th June 2022, 07:41 PM #5
grumble grumble not happy Jan.
2 weeks ago I stupidly ordered sanding discs through Ebay, i purchased 80, 120, 240 and ready to throw in the bin. Granted the velcro on my (old) Festool sander needs replacing but they just dont last.
Cant afford to but I think some of these Abranet might be heading my way.I would love to grow my own food, but I can not find bacon seeds
-
30th June 2022, 08:09 PM #6.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
Thanks for the quick replies.
Thanks Jack, is yours a hand sander and what width (and length) do you use ?
Left knee's shot cant even stand up in the shed for more than a few mins. Restricted to being seated I'm having a crack at designing a 3D printed hand sander . The design has just about variable everything length/width/height. holes size and spacing, different size vac outlet etc. Should be good for loads of testing and experimenting.
I'm also thinking of incorporating a clip on/off base so grits can be swapped by swiping bases thereby protecting the hook and loop master. I'll post some design pics when I get a bit closer.
-
30th June 2022, 08:43 PM #7GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,645
-
30th June 2022, 08:50 PM #8.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
-
30th June 2022, 09:25 PM #9
I have this one
Amazon.com
It uses 6” discs, has velcro on three sides so that you can change the orientation of the disc and actually use the sides for fine work.
GregIt's all part of the service here at The House of Pain™
-
30th June 2022, 09:38 PM #10.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
-
30th June 2022, 10:08 PM #11.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
-
30th June 2022, 10:35 PM #12.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,796
This is a quick and dirty 3D printable Open SCAD design I mocked up this arvo for a shop vac extracted hand sander.
Yeah I know they're not very expensive but this is more challenging fun even if somewhat frustrating.
Screen Shot 2022-06-30 at 7.14.25 pm.png Screen Shot 2022-06-30 at 7.14.35 pm.png Screen Shot 2022-06-30 at 7.22.03 pm.png
It's basically 3 parts, base, top and vac spigot.
I programmed everything except the egg code which I found on Thingiverse - its actually in two halves and normally printed with the cut halves down to avoid support but I want to print its attached so my print will need to use supports. Getting the egg to reorient and relocate above the top was the thing that took the longest
The program is set up so that you can print any one our all of the 3 pieces.
The vacuum spigot could directly attached to the top but I'm considering a spigot with some sort of a bayonet fit and then different size spigots could be printed to suit different vac nozzle sizes.
The base is separate because I'd like to have several bases (with different grit sizes)that clip on and off then base. This would save wear and tear on the hook and loop component when removing and replacing different grits. Still need to work out a simple clip on mechanism - should not be too hard - I have a bag type clip design that I can probably pirate.
Everything can be adjusted, length, width, height, handle size, location and profile, top tapers, hole sizes, location and numbers. I just need to settle on a mesh size and then I can have a crack at printing it.
Question - was thinking of generating some small holes in the top like I've seen on some other sanders. What do you reckon?
-
30th June 2022, 11:21 PM #13GOLD MEMBER
- Join Date
- Nov 2007
- Location
- melbourne australia
- Posts
- 2,645
Yep, these guys. Same place as I got the hand sander and vac hose. Mirka ABRANET 75mm abrasive sheet
– Mallee Agencies
-
1st July 2022, 01:03 AM #14
I have been using 3M Xtract paper for the past 6 months or so. See sand paper test conducted here
Largest Sandpaper Test EVER Done - Top 19 brands Tested using Robots for Unbiased Data - YouTube
-
1st July 2022, 04:05 PM #15
Note that you are attaching this sander to a shop vacuum, Bob. I think that is really important; keep us posted.
I have used abrunet on a ROS for a few years now. My experience, compared to 3M white aluminium oxide discs is:
- Abrunet is a little faster and has significant longevity over 3M when using the dust bag on the sander, and
- Abrunet is a lot faster and has a lot of longevity over 3M when using the shop vac attached to the sander.
I haven't done a scientific test so I cannot quantify those figures. I think the finish is also a little better and for some reason I prefer to use Abrunet. Sanding is not my favourite task!
Similar Threads
-
Abranet, any good or an expensive gimmick.
By Old Croc in forum WOODTURNING - GENERALReplies: 3Last Post: 13th April 2018, 08:10 AM -
Mirka Abranet first impressions
By Scally in forum WOODWORK - GENERALReplies: 17Last Post: 6th July 2016, 12:05 AM -
Abranet
By Tiger in forum WOODTURNING - PEN TURNINGReplies: 13Last Post: 9th August 2015, 11:16 PM -
Abranet on ROS (Could damage the Velcro pad???)
By hcim in forum HAND TOOLS - POWEREDReplies: 0Last Post: 20th September 2010, 06:08 AM -
Abranet sanding
By maxmac in forum METALWORK FORUMReplies: 2Last Post: 21st February 2010, 09:17 PM