Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Acrylic Edge Buffing to Clear
-
14th January 2023, 12:27 PM #1
Acrylic Edge Buffing to Clear
I got away with sanding 400 grit (up and back 10 times) then 800 grit (up and back 10 times) then polishing wheel up and back 5 to 10 times. that flame technique was impossible for me.
Acrylic Edge Buffing to Clear
Used granat sandpaper
400 up and back 10 times
800 up and back 10 times
Polishing wheel up and down 5 times.
Wipe away residue.
If not perfectly clear polish again
At 30°c in the garage.
Using
MAKITA Cordless Random Orbit Disc Sander BBO180Z18V 5"(125mm)
Ozito Bench Grinder - OZBG150WA - I/N: 6290083
Josco 150mm Grinder Accessory Polishing Buff I/N: 6310315Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge
-
14th January 2023 12:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Clear Acrylic Lacquer - Can I put something on top, is it water resistant?
By thinkswithelbow in forum FINISHINGReplies: 0Last Post: 7th June 2022, 03:07 PM -
Clear coat acrylic lacquer
By Oldgreybeard in forum WOODTURNING - GENERALReplies: 3Last Post: 7th December 2014, 10:06 PM -
Free chunks of 25.0mm clear acrylic (Perspex)
By Gerbilsquasher in forum METALWORK FORUMReplies: 4Last Post: 25th August 2012, 01:03 AM -
Clear finish to protect hand painting in artist's acrylic?
By Psych 101 in forum FINISHINGReplies: 3Last Post: 21st March 2009, 06:56 PM