Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Adjustable Levelling Feet
-
24th June 2018, 01:40 AM #1SENIOR MEMBER
- Join Date
- May 2011
- Location
- Melbourne
- Posts
- 237
Adjustable Levelling Feet
Has anyone come across this style of levelling foot in Aus?
https://i.ebayimg.com/images/g/KSEAA...uF/s-l1600.jpg
I'm wanting to build an table saw outfeed table and they would be handy. It wouldn't be too hard to make some up I think but thought I'd search for one in-store but can;t find anything like it locally.
-
24th June 2018 01:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th June 2018, 06:40 AM #2rrich Guest
Just go to your local appliance parts store. Those feet are exceptionally common. You can get threaded inserts to put into the bottom of the outfeed table legs. You can then just screw the feet into the threaded inserts. I think that the ones that I last used were ¼ x 20 threads. If you can't find Imperial threaded inserts I can always post a few to you.
-
24th June 2018, 10:48 AM #3Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Hafele sell them
-
24th June 2018, 10:59 AM #4
Not sure if these are the ones elanjacobs is referring to but they would work.
-
24th June 2018, 11:03 AM #5Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
24th June 2018, 03:16 PM #6SENIOR MEMBER
- Join Date
- May 2011
- Location
- Melbourne
- Posts
- 237
That's it. Thanks for the link.
-
25th June 2018, 04:45 PM #7rrich Guest
There is one other thing to be concerned about. Put a nut on the threaded shaft between the foot and holding bracket. After you have your outfeed table adjusted, tighten the nut against the bracket or bottom of the leg. This will keep the adjustment in alignment.
-
25th June 2018, 05:01 PM #8SENIOR MEMBER
- Join Date
- May 2011
- Location
- Melbourne
- Posts
- 237
That's a good idea. Kind of like a the theaded rod and nuts to tension thicknesser belts.
-
26th June 2018, 08:41 PM #9SENIOR MEMBER
- Join Date
- May 2011
- Location
- Melbourne
- Posts
- 237
D343729A-7D66-47A2-88F7-C430B73F2939.jpg492A3F8B-1B46-447B-ABE7-F037C49A709A.jpgSo I decided to make some. It took about 30mins, a bit of angle iron, some spray paint and a few threaded feet from Bunnings. Thanks for the links but I figured I’d have a go at this. They should work fine for what I’m wanting.
Similar Threads
-
Machine Levelling Feet
By Anorak Bob in forum METALWORK FORUMReplies: 30Last Post: 15th April 2011, 10:17 AM -
Way around adjustable feet
By Beare Man in forum THE WORK BENCHReplies: 3Last Post: 13th August 2009, 01:01 AM -
Levelling Feet
By PhilBiggs in forum WOODWORK - GENERALReplies: 5Last Post: 21st March 2004, 03:29 PM