Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: New bandsaw, Old red gum.
-
15th March 2006, 11:09 PM #1Member
- Join Date
- Sep 2004
- Location
- Pakenham, Melb
- Age
- 79
- Posts
- 55
New bandsaw, Old red gum.
Got myself a new 18" bandsaw, and want to cut down some old redgum sleepers. I beleive that the wood is hard to cut ,and someone has suggested a 1" blade with 11/2 tpi.
Would the majority agree with this?
Thanks in advance.
Tony.
-
15th March 2006 11:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th March 2006, 07:41 PM #2
Ask Henry Brothers in Sydney, but I believe 1 1/2 tpi with a nice broad blade should be fine.
-
16th March 2006, 08:45 PM #3
What 18"BS is it? My BS (bas470 timbecon)will take up to a 38mm, currently running a HB's 1 1/4" 1tpi serlite tipped for resawing... get the biggest blade that'll fit!
Have the sleepers been used by the railways... I wouldnt risk a $100+ blade....................................................................
-
16th March 2006, 08:45 PM #4GOLD MEMBER
- Join Date
- Sep 2004
- Location
- Melbourne
- Age
- 87
- Posts
- 1,327
I got a 1" 1.5 TPI hook Skip in bimetal from Henry Bros. I hav'nt tried it in old redgum but have used it on some wattle logs(green) up to 250mm and it worked well apart from gumming up with the resin .
I've just become an optimist . Iv'e made a 25 year plan -oopps I've had a few birthdays - better make that a 20 year plan
-
16th March 2006, 08:57 PM #5
That band from HB should be fine, but make sure you increase your speed. I got one recently and found that running it at a slow speed, it just jammed. Crank up the speed and it'll cut like a laser.
Bodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
16th March 2006, 08:58 PM #6
Harry72 has a point, if the timber has been used as old sleepers there may be embedded gravel or other stones, which won't do the (or any) blade much good...
I'm not aware of any manufacturer of a stone detector either
-
16th March 2006, 09:10 PM #7
I have recently been cutting old (railway) sleepers into blanks with my band saw.
I find taking to the timber with a wire brush helps get rid of the worst of any grit which may be embeded in the timber.
I also use blade lubricant and feed the redgum though nice and slow.. seems to work fine and I'm just using the crappo blade that came with the saw so as not to risk my nicer blades.
-
16th March 2006, 11:28 PM #8Senior Member
- Join Date
- Dec 2003
- Location
- Sydney
- Posts
- 173
If you do this then:
(1) take it slowly;
(2) check the heat of your motor after each cut; and
(3) check how sharp your blade is after each cut.
This is speaking from experience where I burnt out my 2Hp motor cutting RRG.
Regards,
Mike.
-
17th March 2006, 01:13 PM #9Member
- Join Date
- Sep 2004
- Location
- Pakenham, Melb
- Age
- 79
- Posts
- 55
Thanks Fellas
Tony.
-
17th March 2006, 02:33 PM #10Banned
- Join Date
- May 2005
- Location
- Burnett Heads, QLD
- Age
- 64
- Posts
- 1,535
Originally Posted by Auld Bassoon
-
17th March 2006, 03:17 PM #11Originally Posted by Auld Bassoon
I'm not aware of any manufacturer of a stone detector eitherCheers,
Craig
-
17th March 2006, 04:20 PM #12Originally Posted by doug the slug
cheers
W
-
17th March 2006, 07:36 PM #13Originally Posted by doug the slug
Similar Threads
-
Blakely's Red Gum
By ian yack in forum TIMBERReplies: 4Last Post: 16th February 2006, 10:26 PM -
Red gum burl cheeseboard with blacksmithed lizard
By dan_tom in forum WOODWORK PICSReplies: 10Last Post: 21st October 2005, 12:12 AM -
where to buy 32mm spotted gum, ironbark, red gum, jarrah or merbau decking
By toyospares in forum TIMBERReplies: 1Last Post: 6th August 2003, 09:33 PM -
Red Gum Suppliers Victoria
By Gezza in forum WOODWORK - GENERALReplies: 3Last Post: 14th June 2003, 10:35 AM -
Red Gum benchtops
By shane cloak in forum WOODWORK - GENERALReplies: 2Last Post: 15th February 2002, 07:42 PM