Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 27
Thread: Cot drop-down mechanism - ideas?
-
12th June 2006, 09:42 PM #1
Cot drop-down mechanism - ideas?
I'm putting together a cot and plan to build in a drop-down mechanism. I've had a look at a few baby furniture shops and all they have on their cots are those horrible-looking plastic things. No way am I putting plastic on my cot (well, my future nephew's cot).
I haven't been able to find any alternatives, either to buy or to build myself, apart from one where they used a metal drawer slide mechanism. I would really appreciate any suggestions.
-
12th June 2006 09:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th June 2006, 09:47 PM #2
-
12th June 2006, 10:28 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,800
I looked at many drop down cot designs and decided they weren't up to our needs so I designed my own. I made one with a small drop down lower section combined with a large folding side/top. We also needed our cot completely covered because we were worried about our cat.
The cot was designed around a small bed but raised by extendable legs to a decent adult height. On top of the bed sat an all round cage.
The lower drop down section attached to the bed is normally always in place and was only intended for making it easier to clean and hold the mattress in place and provides a small barrier to stop a baby rolling out of the cot.
The sides and top of the cage are double piano hinged so the side folds up and with an appropriate stop can stay up like a teepee or can be tucked under the top for extra stability. See second row of drawings for a side view.
I also placed extendable legs on the cot so that while bub was small the cot was up at adult height (ie mum doesn't need to bend over to pick up or cuddle bub). Once todler could get out of bed themselves the legs were lowered and cage removed to create a small bed. This system proved a valuable transit for a number of users from cot to full bed.
The cot has used for 22 years by a succession of 8 different bubs starting with my son followed by nieces and nephews (I have 26 nieces and nephews), no drama, no problems. I remember all of my nieces and nephew loved the cot and wanted to play in it whenever they came over. It's currently stored safely in our loft and lining up for action for the next generation. I have some pictures somewhere if you are interested.
Hopefully that will give you some ideas to work with.
-
12th June 2006, 11:40 PM #4Member
- Join Date
- Aug 2004
- Location
- Ballarat
- Posts
- 64
Carba-tec WA
My nephew made a cot for his daughter & bought these for it, he's very happy with them.
-
13th June 2006, 12:00 AM #5Finger Chipper
- Join Date
- May 2006
- Location
- Hamilton, VIC
- Age
- 51
- Posts
- 45
only problem I have with the design is your munchkin may be taller than the "top" by the time s/he is 6 to 8 months old and standing calling for you to rescue him/her in the night.
You might be better with a two piece front and two piece top without having the top and side integrated into the same unit.
Hmmmm. Now that I think about it, a fully enclosed cage might have been a good idea when my son decided to climb out of his cot. Nice and safe, can't get out....hmmmm he's 2.5
To quote Bob Parr..."I still got time."
-
13th June 2006, 12:04 AM #6Finger Chipper
- Join Date
- May 2006
- Location
- Hamilton, VIC
- Age
- 51
- Posts
- 45
Gaol Time
I can just see the littly in your cage with his bottle rattling on the cage bars and in his piping little voice "...no body knows the trouble i've seen, nobody knows my sorrow..."
-
13th June 2006, 12:12 AM #7.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,800
Originally Posted by jugglingogre
-
13th June 2006, 12:17 AM #8
This may help.
http://www.bubhub.com.au/infosafetyfurniture.shtml
Attachment 24877
HJ0Last edited by HJ0; 16th August 2006 at 08:45 PM.
-
13th June 2006, 07:56 PM #9Senior Member
- Join Date
- Jul 2005
- Location
- Auckland NZ
- Age
- 76
- Posts
- 151
Harry you can get the drop down mechanism from www.clicksystems.com.au
they are the same as the ones that are supplied from Carbartec WA and half the price $15 + GST
Good luck
Peter
-
13th June 2006, 08:12 PM #10Senior Member
- Join Date
- Jul 2005
- Location
- Auckland NZ
- Age
- 76
- Posts
- 151
Harry I have just found the Australian/nz standards for cots. please send me a PM or Email with you're Email address and I will send to you.
When building it is an idea to be able to lower the rails for when they get bigger so that you will have 600ml from the top of the mattrass to the top of the side so they are not able to toss themselves out of the cot on to the floor.
Cheers Peter
-
14th June 2006, 02:21 PM #11SENIOR MEMBER
- Join Date
- Oct 2001
- Location
- ACT
- Posts
- 455
I had this dilema, a couple of years back and almost decide to make a metal type sliding mechanism my self - ie bend some metal bar at appropriate points and drill holes etc. ( I have a metal working background)
In the end the nature of the cot i built lent itself to just having a routed groove each side of the cot, with the sliding cot side having a corresponding tongue that fitted into it. the advantage of this system is that when the cot side is up there are no or almost no gaps, or bars that little finger can get caught in. This arrangement still works very well after 2 and abit years. See pic if it decides to attach it self or not. or try herehttp://www.woodworkforums.ubeaut.com...ad.php?t=11781
The cot is recycled redcedar and tassie oak.
Stephen
-
14th June 2006, 08:04 PM #12Originally Posted by mkb
I have used these in the past. Affordable, strong and they are easy to fit.
-
15th June 2006, 08:11 PM #13
Thanks for your advice!
Thanks for all the suggestions! Now I have no more excuses to put off the project!
I already have a copy of the Australian Standard for cots, so thanks very much for the offer.
-
15th June 2006, 08:44 PM #14Woodworker
- Join Date
- Apr 2006
- Location
- Brisbane
- Age
- 49
- Posts
- 395
Harry R,
I built a cot several years ago and had your problem. I offer an alternative solution to those discussed so far, although this is not my idea (I saw it on a cot years ago).
I routed a groove on either end of the cot, with the upper grooves being a straight cut and the lower grooves being an upsidedown "J" type cut (see pictures attached). This sort of mechanism is fail safe, requires absolutely no hardware, and can be lifted and lowered with one hand. That is, to lower, the side only need be lifted slightly while pushing it inwards with your knee. This pushes the pins riding in the upsidedown "J" slot up and over the top (or bottom!) of the "J". On my cot, when raising the side, the pressure provided by the mattress pushes the side back up over the curve so it can settle into its "up" position. Boy that description doesn't sound very good. Just look at the pictures... Cheers, Luckyduck
-
15th June 2006, 10:00 PM #15
I posted some images in this OLD thread of what I did:
http://www.woodworkforums.ubeaut.com...ead.php?t=6856
The drop sides simply had a rebate which slid in the vertical posts.
The latch held the side up.
I must say I do like the elegance of the inverted J method, good one.
Cheers, RayRay
Similar Threads
-
cot finish , child safe
By rick_rine in forum FINISHINGReplies: 5Last Post: 22nd April 2008, 10:18 PM -
Your Triton Ideas please
By Just George in forum TRITON / GMCReplies: 46Last Post: 29th June 2005, 12:54 PM -
Was A Fence - Is A Cot
By Corcorbear in forum WOODWORK PICSReplies: 2Last Post: 2nd May 2005, 10:31 PM -
Hardware for cot drop sides
By Bert in forum WOODWORK - GENERALReplies: 13Last Post: 20th May 2004, 12:09 PM -
Latches for Babies Cot
By johnro in forum WOODWORK - GENERALReplies: 6Last Post: 16th October 2002, 09:10 AM