Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Dawn vice installation
-
27th July 2018, 11:29 PM #1Novice
- Join Date
- Apr 2018
- Location
- Para vista, SA
- Age
- 42
- Posts
- 17
Dawn vice installation
Hi all. I'm in the final stages of building my Paul Sellers workbench. I'm planning to install a dawn no 9 vice.
I'm wondering if anyone can give any advice on the best method of installation, particularly regarding cutting the hole in the apron. My apron is around 30mm thick. I suspect in addition to the hole for the rods, I'll need to chisel out a couple of strips to house the 2 reinforcing braces on the back of the fixed face.
Has anyone else done this before? Any advice?
Thanks in advance
Tim.
Sent from my SM-G950F using Tapatalk
-
27th July 2018 11:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th July 2018, 07:36 PM #2Novice
- Join Date
- Apr 2018
- Location
- Para vista, SA
- Age
- 42
- Posts
- 17
Never mind. I worked out a way.
Sent from my SM-G950F using Tapatalk
Similar Threads
-
Dawn No 10 and Dawn Saw Sharpening Vice
By Genomey in forum SHARPENINGReplies: 8Last Post: 13th July 2016, 02:51 PM -
Help with Dawn vice
By The Caboose in forum THE WORK BENCHReplies: 3Last Post: 19th May 2016, 10:19 AM -
Dawn number 8 Vice
By Jims shop in forum THE WORK BENCHReplies: 1Last Post: 31st December 2014, 06:01 PM -
Dawn No 7 Vice
By Twisted Tenon in forum HAND TOOLS - UNPOWEREDReplies: 9Last Post: 23rd January 2013, 07:01 PM