Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Dewalt thicknesser problem
-
7th October 2018, 02:55 PM #1Novice
- Join Date
- Jun 2017
- Location
- auckland
- Age
- 49
- Posts
- 21
Dewalt thicknesser problem
Lines left on timber after feeding it through. Lines are evenly matched apart , seem to match screw heads that hold the blades in as when I change blades I’ve noticed the black has worn off the screw heads.
Sent from my iPhone using Tapatalk
-
7th October 2018 02:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
7th October 2018, 03:30 PM #2Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Which Dewalt unit is it? Has someone tried to resharpen the blades? Can you provide s photo of the blade and clamp in place?
-
7th October 2018, 04:02 PM #3rrich Guest
Did you buy the unit used? Sounds like the wrong screws to me.
-
8th October 2018, 01:30 PM #4
Pictures would help us identify the problem but as the others have said either wrong screws or the blades have been ground down so far the screw heads are proud. The blades are disposable so perhaps new blades will do the trick. That said I have got away with touching up my blades by hand in a home made jig so not removing much metal like a grinder would. One sharpen each side and you half the blade cost.
Regards
John
-
9th October 2018, 01:20 PM #5Novice
- Join Date
- Jun 2017
- Location
- auckland
- Age
- 49
- Posts
- 21
thanks for replies guys. I ma going to try some new blades as wonder if existing ones were sharpened down way too much so screws are now proud.
Similar Threads
-
Dewalt Thicknesser
By Wombat2 in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 1Last Post: 4th July 2010, 02:03 PM -
Dewalt 735 Problem
By Glennet in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 10Last Post: 1st July 2009, 10:51 PM -
Dewalt DW735 Thicknesser problem
By justinmcf in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 0Last Post: 12th March 2009, 11:07 AM -
Dewalt Thicknesser
By boxers in forum JOINTERS, MOULDERS, THICKNESSERS, ETCReplies: 4Last Post: 3rd May 2008, 12:57 AM