Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Gauge???
-
30th January 2002, 08:29 AM #1
Gauge???
Slightly, well, a long way off WW but found this on another BB and thought it would be of interest.
Was going to put it in woodies jokes but thought this would be better.....
"An interesting story about old standards"
The US standard railroad gauge (width between the two rails) is 4 feet, 8.5 inches. That's an exceedingly strange number. Why was that gauge used? Because that's the way they built them in England, and the US Railroads were built by English expatriates. Why did the English build them like that? Because the first rail lines were built by the same people who built the pre-railroad tramways, and that's the gauge they
used. Why did "they" use that gauge then?
Because the people who built the tramways used the same jigs and Tools that they used for building wagons which used that wheel spacing. Okay! Why did the wagons have that particular odd wheel spacing? Well, if they tried to use any other spacing, the wagon wheels would break on some of the old, long distance roads in England,because that's the spacing of the wheel ruts. So who built those old rutted roads?
The first long distance roads in Europe (and England) were built by Imperial Rome for their legions. The roads have been used
ever since. And the ruts in the roads?
Roman war chariots first formed the initial ruts, which everyone else had to match for fear of destroying their wagon wheels. Since the chariots were made for (or by) Imperial Rome, they were all alike in the matter of wheel spacing.
The United States standard railroad gauge of 4 feet, 8.5 inches derives from the original specification for an Imperial Roman war chariot.
Specifications and bureaucracies live forever. So the next time you are handed a
specification and wonder what horse's came up with it, you may be exactly right, because the Imperial Roman war chariots were made just wide enough to accommodate the back ends of two war horses. Thus, we have the answer to the original question.
Now the extraterrestrial twist to the story...
When we see a Space Shuttle sitting on its launch pad, there are two big booster rockets attached to the sides of the main fuel tank. These are solid rocket boosters, or SRB's. The SRB's are made by Thiokol at their factory in Utah. The engineers who designed the SRB's might have preferred to make them a bit fatter, but the SRB's had to be shipped by train from the factory to
the launch site. The railroad line from the factory had to run through a tunnel in the mountains. The SRB's had to fit through that
tunnel. The tunnel is slightly wider than the railroad track, and the railroad track is about as wide as two horses' behinds.
So, the major design feature of what is arguably the world's most advanced transportation system was determined over two thousand years ago by the width of a horse's .
And you wonder why it's so hard, to get ahead in this world...
Stupidity kills. Absolute stupidity kills absolutely.
-
30th January 2002 08:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th January 2002, 09:05 AM #2Supermod
- Join Date
- Jul 1999
- Location
- Brisbane, Qld.
- Age
- 47
- Posts
- 1,260
Not being 100% sure I am gunna throw this in anyway.
There is no train tracks into the launch site of NASA. Infact the SRB's are brought into the site by boat. I know I've been there. But thats not to say that they don't have to travel by train at some stage of there journy though...
-
30th January 2002, 01:48 PM #3
So, when the Romans built their chariots, what was the Roman Unit of Measure, at that time?
Two Horses 's?
To me, since Romans were a waring nation, it standard would be '10 sword hilts', or 'one lance'.
The Romans conquered every known nationality within its reach. Absorbing cultures along with their arts and industries.
We give Romans the credit for spreading every modern convenience at the time. And Even today. Like running water and sewers. To only name a very, very few.
Which I believe is correct.
Just out of curiosity I wonder which nationality was origionaly responsible for what industry.
------------------
Thanks,
Barry G. Sumpter
Proud Tritoneer
[This message has been edited by barrysumpter (edited 30 January 2002).]Thanks,
Barry G. Sumpter
May Yesterdays Tears Quench the Thirst for Tomorrows Revenge