Thread: HSC Research Help (Secret Haunched Stub Mortise and Tenon double housing joint )

Try here
http://woodworker.com/cgi-bin/search.exe


If the link doesnt work properly, just type in "mortise", in the search bar.

( which it didnt )
Cheers, Al

Thefool,
haven't worked in any joineries doing this work but a mate of mine did. They have a machine called a tenoner (oddly enough) which cuts a tenon on the end of your stock. It is CNC controlled and you program it for your stock size, tenon size(s) and quantities and away you go. Poke the stock in the machine, puch foot pedal, pneumatic clamps hold stock and multiple router heads do the rest, clamp releases and you pull the timber out.
If you go to: http://www.southeastern.com.au/#24 you may find a picture.
The mortice would be cut on a CNC overhead router, same deal, you program in the mortice(s) dimensions and quantities, place stock in machine against fence and stop, operate the hold down and away you go. Not very interesting work at all.

Mick

Hi, for a source for your requirement try your library means for a book called "The Joint Book" by Terrie Noll isbn 1-877082-09-0.

Cheers

The Fool

The machines described by Mick are used extensively in the furniture industry. In particular, you'll find them used by manufacturers of outdoor furniture. Your profile doesn't show where you're located but if you're near any of the major cities, have a look in the Yellow Pages for an outdoor furniture manufacturer. Contact them and explain your research project. I'm sure you'll find one of them that will let you have a look at the process.

Col

Thanks a bunch guys, your all champs. This has helped me so much. Last thing on my list is to read the OHS regulations of 2001 and find which ones are relevant to my "technological process" i.e. Secret Haunched Stub Mortise and Tenon double housing joint

Thanks Mick for the directions, helped alot.

P.s. anyone help me on this.... :P

a) Provide evidence of the latest technological development in your chosen area of study. (the joint)

Whose research project is it???
Lucky I'm not your teacher, I'd fail you for trying to get someone else to do your hsc work for you and for your spelling of the word YOU'RE.It is short for YOU ARE, Therefore your use of the word YOUR is incorrect and unforgiveable.
cheers
Jim

You are only picking on one spelling mistake, Jim.
I counted eleven in his opening sentence, and stringing 119 words together into one sentence ?? I would have thought that a HSC student would know better.

Peter.

I would of thought that members here would be trying to encourage younger people to use the forum. If you put them down, then we might possibly lose them in the future. In my opinion that would be a real shame. Maybe a little POSITIVE criticism might be warranted about his spelling.

Regards Blindbambi

And he is researching woodworking .... not languages

So it's Ok to pick on Sturdee then is it?

He asked a question and was given respect and and an acurate answer.

He is pushing it.

Why doesn't he just post his asignment here and we can all do it for him.

Originally posted by blindbambi
Maybe a little POSITIVE criticism might be warranted about his spelling.

I thought I gave positive criticism about his spelling in pointing out the lenght of his rambling opening sentence.

In my days at school for every spelling mistake the examiner would deduct one mark from the proposed mark for any exam. The lack of correct use of English failed many a student but they were the good old days.

We had a recent discussion about the lack of English taught in schools and this seems to be a prime example.

Now before I get flamed bear in mind that I did not enter the discussion earlier when members helped TheFool with answers to his question. However when it looked like members would have to do all his research (and possibly write his essay) it became a different matter.

Just my two cents worth.


Peter.

[QUOTE]Originally posted by Sturdee
[B]I thought I gave positive criticism about his spelling in pointing out the lenght of his rambling opening sentence.

spot the spelling mistake. Couldn't resist this one, just a bit of positive critisism.

Sorry,
didn't realise I was being so intrusive. I decided to go to the source, i.e. a forum of people who enjoy Craftsmanship enough to have the knownledge and want to impart it to others.

It IS a RESEARCH TASK, so the idea is to collection information from a variety of sources, perhaps people here would feel better if i asked for their personal details, then over a long tedious conversation tried to in someway find the information I was seeking.

I don't want to sound rude, but if you don't want me asking questions the way I do, then don't read my posts.

Im 17, Just wondering if anyone here could call themselves a Led Zeppelin fan..? Just Curious...