Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Incra ultra lite jig clamping
-
21st April 2009, 04:09 PM #1Novice
- Join Date
- Apr 2009
- Location
- Holly, MI
- Posts
- 10
Incra ultra lite jig clamping
I bought an incra ultra lite jig and I'm curious what you guys think about how I should clamp it to my table. I explain more detail in a video clip on my blog...
http://panofish.net/2009-04-20_Incra_Jig
-
21st April 2009 04:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
21st April 2009, 05:54 PM #2
Use MagJig magnets and a larger board
Hi,
I had a very similar problem. My solution was to use MagJig magnets (http://www.magswitch.com.au/mag-jigs/30mm-mag-jig.html). These are on/off rare earth magnets as shown in the following link http://www.woodworkforums.ubeaut.com.au/showthread.php?t=75928.
You will have to make your board larger to reach the cast iron top of the tablesaw.
Hope this helps
-
21st April 2009, 06:42 PM #3Novice
- Join Date
- Apr 2009
- Location
- Holly, MI
- Posts
- 10
I like it... I think I may make one using the cheaper harbor freight magnetic switch bases.
I've already made some magnetic featherboards with these and they work well.
I may need 3 hf switches to ensure it is solidly clamped.
Similar Threads
-
Ultra Jig Lite
By tonysa in forum INCRA JIGSReplies: 21Last Post: 2nd November 2006, 09:11 AM