Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Leather Strop
-
10th February 2019, 09:57 PM #1
Leather Strop
My son's a keen 'whittler' and asked for a strop for his knives.
I knocked up the one in the photos in a morning (including glue-up time) out of some pine scraps. The handle is laminated out of the same pine, reinforced with dowels and then shaped with a chisel, rasp and finally sanded. Finish is simply boiled linseed oil. The leather was given me by a retired saddle maker for a chair repair job I did for him. There was enough leather to make myself a new one (without handle) for finishing my chisels and plane blades.IMG_1712.jpgIMG_1711.jpg
Blade size is approx 200x60
Cheers
Pete
-
10th February 2019 09:57 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th February 2019, 06:12 AM #2GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Very nice. Clamped to the bench?
Do you plan to use a honing compound such as Aluminum Oxide or Chromium Oxide ot the usual mix of those two?
-
11th February 2019, 07:51 AM #3
Hi RV. Yes, I normally use chromium oxide on my strops (not sure what my son uses). His is relatively lightweight as he often carries it with him and he's only stropping short bladed knives. Mine has no handle and I usually clamp it in the vice.
BTW, he got his enthusiasm for whittling from one of your countrymen, Doug Outside, who has quite a few vids on Youtube.
Cheers,
Pete
-
11th February 2019, 11:45 AM #4GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
I gave up on leather some years ago. Any pressure and the leather compressed then rebounded to round off the bevel.
Gentle strokes for short knives on that leather ought to be ideal.
Now all I use are cut up file folders, office cards and the inner surfaces of food box card stock.
Piece of polished granite counter top as a flat base. No glue, just dabs of masking tape.
I need abrasives that I can wrap on mandrels for crooked knives.
I've learned that tennis balls are good for adze gutter blades.
I've heard of Doug Outside but never looked at his work.
I stick mostly to the local Pacific Northwest wood and design elements for carvings.
Similar Threads
-
DIY Strop - Would this leather suit?
By RedShirtGuy in forum SHARPENINGReplies: 12Last Post: 27th January 2020, 06:30 PM -
Kangaroo Leather Strop
By snafuspyramid in forum SHARPENINGReplies: 8Last Post: 4th February 2013, 09:49 PM -
Honing chisels with a leather strop
By Dengue in forum SHARPENINGReplies: 32Last Post: 29th December 2012, 04:59 PM -
Leather strop in Brisbane
By Jerry Crockford in forum SHARPENINGReplies: 0Last Post: 20th October 2009, 10:13 PM -
Leather strop - which side?
By rodm in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 24Last Post: 11th March 2005, 12:51 PM