Thanks: 0
Needs Pictures: 0
Results 1 to 5 of 5
Thread: The Little Shelf
-
11th December 2018, 11:20 AM #1Novice
- Join Date
- May 2014
- Location
- Devonport, TAS
- Posts
- 15
The Little Shelf
Partner away, nothing important to do, so made a little shelf (hinted at for two or three years) to go in the corner of the laundry to hold a few bottles of everyday products.
I had a 1 metre length of 140 x 19 DAR pine, so measured and cut it into two 280mm uprights and a 440mm shelf. Glued and screwed it together with a 440mm piece of 42 x 19 to hold it together, and as a support. Drilled a hole in each upright for a 478mm length of 12mm Tas Oak dowel, then applied undercoat and two top coats of white enamel. Two mounting screws through the 42 x 19, and there 'tis.
I'll be right...
Laundry Shelf.jpg
-
11th December 2018 11:20 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th December 2018, 11:24 AM #2Senior Member
- Join Date
- Oct 2008
- Location
- Brisbane
- Posts
- 145
Simple and easy, if only all of life could be the same.
Good job
Sent from my iPhone using Tapatalk
-
11th December 2018, 11:44 AM #3
I like the idea of the hanger for the squirters.
Consider it pinched... well... eventually. Once I get around to doing a similar job in my HoneyDo list, a year or three from now.
- Andy Mc
-
11th December 2018, 12:47 PM #4Novice
- Join Date
- May 2014
- Location
- Devonport, TAS
- Posts
- 15
Cheers, mate. Yep, if only...
-
11th December 2018, 12:47 PM #5Novice
- Join Date
- May 2014
- Location
- Devonport, TAS
- Posts
- 15
Mate, no rush!
Similar Threads
-
Shelf Pin Help
By Damienol in forum WOODWORK - GENERALReplies: 6Last Post: 13th August 2015, 04:57 PM -
My Shelf with a clock
By snapper1 in forum WOODWORK PICSReplies: 1Last Post: 28th December 2014, 02:47 PM -
What to use to cut BBQ shelf?
By nogi in forum METALWORK FORUMReplies: 5Last Post: 15th August 2014, 07:54 PM -
Shelf Unit HELP
By Tippsy25 in forum WOODWORK - GENERALReplies: 6Last Post: 11th February 2010, 04:36 AM -
cd shelf
By magnet 12 in forum WOODWORK - GENERALReplies: 2Last Post: 14th November 2007, 11:52 AM