Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 35
Thread: Makita vs Maktec
-
2nd January 2008, 07:55 PM #1
Makita vs Maktec
Whats the difference again ? Essentially from the same company yes ?
I went shopping today for a laminate trimmer at one of those Makita dealers.
There was a makita and maktec version. Maktec was $133 (trade) and the makita was $233.
And I was a real pain in the butt to the poor salesman. I got him to get all the boxes out so I could check out the fences........and..... even got him to find a socket for the maktec so I could listen too it powered up.
After looking at it all over, I couldn't see much of a difference between the two. The parts were essentially the same. The thickness of the housings, the collect etc.
Ended up taking a gamble buying the maktec since I'm such a cheap bastard. I wonder how much shorter a life the maktec will have over the makita.
Anybody buy a maktec trimmer thats kicked the bucket ?
-
2nd January 2008 07:55 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
2nd January 2008, 08:13 PM #2SENIOR MEMBER
- Join Date
- Feb 2007
- Location
- Adelaide
- Posts
- 595
I bought a Maktek half inch router - quite a bit cheaper than the brand Makita. I am happy and my wallet is fatter. But I don't know what shortcuts were taken to produce the cheaper item. My guess was that there were not very many real differences. Good brands can only compete with lesser brands by rebadging their product. And so, in addition to the market of people who like quality, they can also market to cheap flints - like me - without compromising the price of their line. But I
could be wrong when the bearings fail on my Maktek.
-
2nd January 2008, 09:09 PM #3
Jake
I also checked out both the Makita and Maktec when I was after a laminate trimmer and ended up buying the maktec as it felt just as solid as the makita and like yourself couldnt see much of a difference other than the colour. Ive had it for about 1yr and have done several jobs with it without any problems.Regards
Al .
You don't know, what you don't know, until you know it.
-
3rd January 2008, 08:01 AM #4
Ta for the responses.
might be right. bearings may be inferior. Don't know much about the motor either.
See what happens. ta.
-
3rd January 2008, 08:07 AM #5Senior Member
- Join Date
- Mar 2007
- Location
- Australia
- Posts
- 207
Sounds like it could be the same as with the blue and green Bosch tools.
-
3rd January 2008, 08:10 AM #6
-
3rd January 2008, 11:22 AM #7
I have a maktec laminate trimmer and think it is just great I have done quite a few jobs with it and it is powerful and a solid performer. As I understand it they are made under license by makita in china, this doesn't appear to be a cheap junkie model. I certainly would consider other products from maktec
Since light travels faster than sound,
People appear bright until you hear them speak.
-
3rd January 2008, 09:06 PM #8
I don't know. Not sure about the drills and the larger router by maktec.
At work theres 2 other makita trimmers just like my new maktec. And they seem identical.
Tell you one I wouldn't get though. The ryobi trimmer. the little wheel of the one I saw at bunnings, on the roller guide fence, doesn't roll proud of the casting that supports it. Silly. Doesn't roll. your guiding off the casting only.
-
4th January 2008, 08:14 PM #9Intermediate Member
- Join Date
- Nov 2006
- Location
- Frenchs Forest NSW
- Age
- 75
- Posts
- 43
I also have the Maktec trimmer and I'm happy with it so far. I think the difference between the two brands is : The Maktec is built in China. Makita in Japan.
-
7th January 2008, 01:34 AM #10
Anyone who thinks there is no difference between these tools is kidding themselves. If the quality was the same, Makita would produce their trimmer there and sell it for the same price. The difference in assembly costs is minimal when compared to the manufacture/purchase price of components. Maktec's main savings are in their purchasing decisions of the bearings, arbour, field, housing, collets, etc.,. At a glance, these components might look the same, but they are FAR from it.
And before anyone wants to dispell my claims as BS, know this: I lived in Hong Kong from '88 - '97, travelled throughout Asia and tested a lot of tools in my time. Professional Asian tradespeople still buy 'Made in Japan' and 'Made in Germany'...
DamienIs it wrong to be in love with a sawbench?
-
7th January 2008, 04:55 PM #11
I know what your saying. Its the safe way to go. But I don't think it applys to everything does it.
eg. At work amongst a couple shelves of makita tools, there's a large ryobi router. Didn't cost as much as a makita, but has held up under heavy use. Lasted as long.
What I'd like to know Damien (or from anyone)...is....have you used both a maktec and makita trimmer heavily , and which has lasted longer ?
How about this ........ If one person bought 2 maktec trimmers at $133 each. And another person bought 1 makita trimmer (which will cost essentially the same amount as 2 maktecs) and they had similar use of a trimmer, which person do you think will have to buy another trimmer first ?
I'm thinking the makita fella will.
-
7th January 2008, 09:07 PM #12Intermediate Member
- Join Date
- Nov 2006
- Location
- Frenchs Forest NSW
- Age
- 75
- Posts
- 43
Hi Damien,
The Mactec is built in China. - To a price. I understand what you're saying. I've been in the air compressor business for 30 plus years and I know the difference of a machine built in China or one coming out of Japan. Mind you the Chinese are getting better all the time. SMC Pneumatics (also a Japanese co) are manufacturing some of their products in China and it's very hard to spot the difference between the chinese and japanese manufactured goods. I suppose only in the long run you will be able to see.
BTW: My money is also on the Makita.
Walter
-
9th January 2008, 12:53 PM #13
Wouldn't surprise me if the Makita (if it says 'Made in Japan') outlasts both of them - ESPECIALLY if they are subjected to demanding working conditions.
Two things kill tools. Dust and heat.
Generally:
Dust: If they are the same design, the dust labarynth will be the same. The RPMs and fan dimensions will also be the same. But lower quality bearings will be more prone to failure. The extra load on the arbour and high revs will help lead to the next major problem -
Heat: I cannot stress the importance of quality wiring. The insulation alone can prove critical to tool life. The quality of the field (coating and winding) make a big difference. The quality of the arbour and its balancing (most expensive electrical part) makes a big difference. The bearings in hi-reving tools are very important.
My first Makita (3600BR) hasn't missed a beat in 20 years. It has not only been reliable, but free of vibration and extremely accurate. There is no doubt that some Chinese factories are producing good tools. But believe me, the day they start producing great tools, they will be as expensive as those from Japan and Germany.
I'm affraid you really do get what you pay for...
Damien
PS. I've said it before but at the risk of sounding like a broken record, I'll say it again: those who scrimp when buying hi-reving tools, should NOT do the same when it comes to buying their safety gear...Is it wrong to be in love with a sawbench?
-
9th January 2008, 02:56 PM #14
Makita made in Japan? Gone are the days... Not Much made by Makita is made here (Japan) anymore.
If I walk into the local Makita dealer today, almost all the range is made or assembled in China, and thats the truth.
The same goes for most of the other Japanese tool sellers (Hitachi, Ryobi)
These days, if it doesnt say made in Japan or made in Germany on it, I wont buy it. Call me a snob, I don't care. Ive been caught out enough buying other tools
-
9th January 2008, 05:34 PM #15SENIOR MEMBER
- Join Date
- Sep 2007
- Location
- Nicholls ACT
- Posts
- 728
Green makita?
At Bunnings today they had some green makita hammer drills. What gives are these another cheap Makita or did they run out of blue plastic?
I never make mistakes, I thought I did once but I was mistaken
Top 10 reasons I procrastinate
1......
Similar Threads
-
Maktec laminate trimmer
By RossM in forum HAND TOOLS - POWEREDReplies: 0Last Post: 23rd April 2007, 07:17 PM -
External speed control for Maktec?
By Edilson in forum ROUTING FORUMReplies: 0Last Post: 25th October 2006, 03:03 PM -
Maktec 1650w Rtr for $199
By Flowboy in forum ROUTING FORUMReplies: 2Last Post: 8th September 2006, 01:32 PM -
Maktec Are They Part Of The Makita Group?
By Metal Head in forum HAND TOOLS - POWEREDReplies: 3Last Post: 17th April 2006, 03:51 PM -
Maktec 1650 watt router
By dan_tom in forum ROUTING FORUMReplies: 9Last Post: 29th July 2005, 10:38 PM