Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 18
Thread: Mitre saw bench
-
30th September 2009, 02:27 PM #1GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Mitre saw bench
Hi there,
I have just made a mitre saw table for my recently purchased makita ls1214. I am now just about to make the fence for the table, however i am not sure where to place the saw on the table.
Bench is 2280x800
My options are:
1. Place the saw in the centre, hence having equal fence length on either side
2. Place it on the right end so i can do repetitve cuts on longer stock using a stop (note if i need to make a cut that will require the need for more room on right side of bench I would just make a cut next to the exact cut line) therefore it will sit nicely on bench/fence
Not sure if i explained myself correctly here.
Andy.
-
30th September 2009 02:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th September 2009, 03:10 PM #2
Hi Andy,
I have the same saw as you, and would be interested in having a look at your bench so far.
Xfigio.
-
30th September 2009, 03:41 PM #3Intermediate Member
- Join Date
- Jul 2009
- Location
- Rochedale Qld
- Posts
- 27
Hi Andy, I'm also interested in your table (and envious, LS1214 looks like awesome kit). I have the Ryobi equilivent (not meaning equal). It is amasingly accutate/repeatable but it scares the hell out of me for fine work. It desperately needs a better clamping and fence system.
Look forward to some pictures or info please ... cheers
-
30th September 2009, 04:18 PM #4GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Hey,
I will go take some photos later today and post them up tonight.
Im also making a box for the rear of the saw to hopefully collect some of the dust that my dust vac doesn't.
Its only a very basic table but very stable.
Andy.
-
30th September 2009, 05:22 PM #5GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Here are the photos, nothing special, but I was keen to use materials lying around the garage rather than purchasing it.
As I said I am making a dust box for the rear of the saw. I am going to drill a circle to feed my shop vac too. However not sure whether to drill it at base of box, or at the rear, any comments on that would be great. I saw one on the net Google Image Result for http://www.woodworkingmatters.com/images/My_Shop/Miter_Saw_Station_Mk_II_11.jpg which I am sort of going off.
Also the pics I have posted are the 2 different positions I am considering placing the saw. I am leaning towards having the saw on the end due to the fact I can then do repetitive cuts with longer stock. And if i have to cut longer stock I can always cut next to my cut line, then it will make whatever I am cutting easier to do repetitive cut.
Can anyone see an issue of doing this?
Also note my dust extractor at the bottom of pic, I'll be cutting a hole to place it in so it sits nice and firm in place and not sag over like it is in the pic.
Also for anyone curious I paid $855 for the LS1214. Bunnings price matched sydney tools who were selling them for $950.
Andy.
-
30th September 2009, 05:31 PM #6
If you are going to be cutting long pieces then the end of the table would be preferable. Nice saw
Reality is no background music.
Cheers John
-
30th September 2009, 07:12 PM #7GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
You dont see me limited in other cutting applications if I was to do this method?
Andy.
-
30th September 2009, 07:37 PM #8
It's a bit of a toss-up I reckon.
If all you'll ever do is trim the ends off long pieces then it should go at the end of the table but if you plan to cut sizable lengths from longer stock then more towards the centre would be my choice. At least then you can provide support for both pieces once the cut is done.
-
30th September 2009, 07:46 PM #9GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
I think I might go 3/4 of the way to the right, and still build a fence on the right of the saw, obviouslly a bit smaller than the left side.
I was going to put shelves in today but I felt sick due to breathing in the MDF I was cutting. I had a dust mask on and a fan to blow the excess away.
Think I might look into a air purifier, as this is not the first time it has happended.
Andy.
-
30th September 2009, 08:27 PM #10Senior Member
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 139
Andy,
See this month's edition of Australian Woodsmith for free plans to build a sled and fence for a mitre saw. The design of the sled makes it easy to move your mitre saw to what ever position you want (in the middle, on the right hand side etc )
See the front cover of the magazine here: Welcome to Australian Woodsmith (top right hand corner).
The magazine is on sale at my local Bunnings.
HTH
MIke
-
30th September 2009, 09:36 PM #11GOLD MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Age
- 37
- Posts
- 2,711
Funny that, I am a subscriber to the mag. The mag came in last week and I did breiefly see the plans, I didn't even think about making a similar one.
Might get it and see what I can come up with, thanks mate
Andy !!
-
1st October 2009, 07:50 AM #12Novice
- Join Date
- Sep 2009
- Location
- uk
- Posts
- 18
i have a idea why dont you make runners in the middle and at both ends of the table then your not limted.
-
1st October 2009, 08:43 AM #13Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
-
9th October 2009, 08:44 AM #14Senior Member
- Join Date
- Dec 2008
- Location
- Oshawa, Ont., Canada (I wish I was in Brissie)
- Posts
- 331
I know it's probably a bit late but you might want to take advantage of the door to the right in the photo and place the saw at the other end of the table. If you have a particularly long piece of stock to cut you can just run it out the door on a roller guide. That's what I'm doing with my mitre station although I'm allowing 6ft to the left and 4ft to the right on my table with longer stock going out the door to the right.
-
9th October 2009, 10:36 AM #15Intermediate Member
- Join Date
- Jul 2009
- Location
- Rochedale Qld
- Posts
- 27
Yep sure is something to think about, my Ryobi only clamps on the left, so it's a "no brain’er" on the off-set on my bench. Mostly, long stock for me is 6m lengths of Aluminum tube for my wind chimes. As it happens I invested heaps in really good lockable castors when I originally built my table (using our old kitchen bench top and cupboards) ... so me and the table migrate to one corner of the (9mx6m) shed when I start a new length. Really really handy
Similar Threads
-
Show us you Mitre Saw Stands/Tables/Bench
By Brisvegas in forum WOODWORK PICSReplies: 26Last Post: 20th July 2011, 11:33 AM -
mitre saw
By Shaver in forum GENERAL & SMALL MACHINERYReplies: 4Last Post: 16th March 2009, 07:31 PM -
Mitre Saw /Panel Clamp Bench
By gidgee 1 in forum WOODWORK - GENERALReplies: 1Last Post: 28th October 2008, 09:07 PM -
which mitre saw to buy $450.00
By hotboost68 in forum HAND TOOLS - POWEREDReplies: 5Last Post: 20th August 2008, 09:20 PM -
Mitre saw
By Zimsta86 in forum HAND TOOLS - POWEREDReplies: 2Last Post: 22nd August 2004, 07:10 PM